For more information, please call Toll-Free 1-877-353-0451 or email us
CONTRACT LABORATORY . COM
The Physical Laboratory Outsource Network!
Directories
Careers
Events
Resources
Experts
News
Site Map
Physical Lab Registration Benefits Register Your Physical Laboratory Submit Physical Lab Testing Requests
Laboratory Requests
Lab Test Requests
Laboratory Directories
Laboratory Service Requests

Science and Laboratory Business Opportunities

Science and Laboratory Product Requests
Test Requests
About Us
Physical, toxicology testing, cytotoxicity testing, preclinical testing, sterility testing, analytical chemistry testing, microbiology testing, bioanalytical testing, environmental testing, pharmaceutical testing, food testing, product safety testing, water testing, bioburden testing  Physical Laboratory Testing Requests
IMAGE SOURCE:CDC PHIL Technician performing Western Blot testing. Antigens if present will bind and be detected.
View All Laboratory Test Requests
Submit Physical Laboratory Test Requests

Contract Laboratory.com has received the following incoming Physical Laboratory Test Requests which need to be fulfilled ! These Physical Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational corporations to government agencies actively seeking Physical laboratories to perform their Physical laboratory testing and research. If your Laboratory receives Laboratory Test Requests that it can not fulfill, please refer them to us! If you have questions, please e-mail us or call 403-770-1992 .
Incoming Physical Laboratory Test Requests
No.
Physical Testing or Physical Description
status
10-02164 UK Physical Laboratory needed for BS 55852 FR TESTING: cigarette & Match on 'MARTIN FR TMB' sample as per BS 55852: part 1 & 2 ( read more ).....
10-02158 Asia Physical Laboratory needed for BSS testing: Flammability testing, Smoke and Heat release testing as per BSS7230, BSS7238 & BSS7322 ( read more ).....
10-02145 India ASTM Physical Laboratory needed to test Brittleness temperature of plastics by impact as per ASTM D 746 ( read more ).....
10-02140 ISO LABORATORY NEEDED FOR FULL ISO PHYSICAL TESTING TO ISO 12947-2 ( read more ).....
10-02123 India Physical Laboratory needed to test Slip Resistance in accordance to ASTM C-1028. ( read more ).....
10-02087 UAE ASTM or BSI Physical Laboratory needed to check the Glass Transition Temperature of the Fiberglass Material by Differential Scanning Calorimeter. ( read more ).....
10-02069 USA Soil Laboratory needed to test mud sample for composition and physical properties. ( read more ).....
10-02052 UK BS MATERIALS LABORATORY NEEDED FOR BS 5853 FLAMMABILITY: CIGARETTE & MATCH + FULL PHYSICAL TEST FOR GENERAL DOMESTIC USE AS FOLLOWS: MARTIN DALE ISO 12947-2 SEAM SLIPPAGE EN ISO 13936-2 TEAR STRENGHT EN ISO 13937-3 TENSILE STRENGHT ISO 13934-1 COLOUR FASTNESS TO LIGHT EN ISO 105-B02 PILLING ON MARTINDALE ISO 12945-2 COLOUR FASTNESS FOR RUBBING EN-ISO 105-X12 FASTNESS TO WATER ISO 105-E01 ( read more ).....
10-01969 India Physical Laboratory needed to test 19 mm thick Polyethylene foam for thermal conductivity in accordance to ASTM C518 or IS 3346. ( read more ).....
10-01965 Physical Laboratory needed to perform proficiency test on PolyVinyl Chloride ( read more ).....
10-01938 Slovenia or Hungary Physical Laboratory needed for Temperature Cycling Testing: 3 cycles in the temperature range of 0 to +70 deg.C. The cycle time shall allow a thermal tabilization after each temperature change, but not less than one-hour. The rate of the temperature change shall be 5°C per minute max. ( read more ).....
10-01911 India Physical Laboratory needed for IS thermal conductivity testing for expanded polystyrene sample ( read more ).....
10-01852 Pune Physical Laboratory needed to test instrument cluster units for Dust (organic and inorganic). ( read more ).....
10-01835 Europe Physical Laboratory needed to do thermal analysis by DSC on three kinds of thermoplastic materials-are interested in the decomposition temperatures of the three materials. ( read more ).....
10-01793 Hyderabad ISO Physical Laboratory needed to determine the depth of each layer of two different kinds of paint coating i.e red oxide + color paint on cold rolled steel sheet products and provide inspection report for the same. ( read more ).....
10-01744 UAE Physical Laboratory needed for Oxidation induction time testing of HDPE pipes ( read more ).....
10-01740 INDIA ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR TESTING CRUDE PETROLEUM PRODUCTS AS FOLLOWS IN ACCORDANCE TO ASTM, DIN AND ISO: 1. Characterization of Crude Oils, Distillation Fractions and Finished Fuels. 2. Petroleum Product Testing. 3. Elemental Analysis. 4. Simulated and Full Range Distillation. 5. Mass Spectrometry (HRMS and GC/MS). 6. Spectroscopy (UV and XRF). 7. Chromatography (GC and HPLC). 8. Physical Property Tests (ASTM and Others). ( read more ).....
10-01711 Europe GLP Analytical Chemistry Laboratory needed for testing biocidal product for physical chemistry properties:acidity/ alkalinity at least pH of a 1% aqueous solution, relative density, storage stability, stability and shelf life,surface tension,viscosity. ( read more ).....
10-01693 Europe; MALTA ILAC Certified Laboratory needed to test cable (PVC insulated non armoured cable grade 450/750V to BS 6004:2000)samples from consignments prior to export. The tests required consist of physical measurements and some basic insulation and resistance tests as detailed in BS 6004:2000. The tests may be required on a regular basis but will probably have to be conducted in MALTA to avoid shipment delays. ( read more ).....
10-01689 Bioanalytical Laboratory needed to measure circulating mitochondrial DNA in Plasma (frozen at -70 degrees Celsius) - Measure concentrations & physical characteristics of the circulating mitochondrial DNA in the Plasma. Contact Me ASAP & Briefly Describe My Request, Not Simply The Contract Labs Test Number. Please Telephone Me ASAP & Provide $Cost and Turn-Around-Time. ( read more ).....
10-01589 India Analytical Chemistry/Mechanical/Physical Laboratories needed for characterization of polymer of starch derivatives using: 1.DSC Differential scanning calorimetric 2.TGA Thermogravimetric analysis 3.TMA Thermomechanical analysis 4.DMTA Dynamic Mechanical thermal analysis 5.OIT Oxidative induction time 6.MFI Melt flow index,Melt flow rate (MFR) Melt indes (MI),Flow rate ratio (FRR) 7.NMR 8.FTIR 9.Morphology study 9.1 TEM Transmission electron microscopy 9.2 SE ( read more ).....
10-01559 USA Physical Laboratory needed to perform analysis on our products (modified starches for use in oil wells)to determine their thermal feature, rheological and filtrate. ( read more ).....
10-01542 Analytical Chemistry Laboratory needed for physical property testing % volatility, evaporation rate. ( read more ).....
10-01529 California ASTM Geophysical Laboratory needed to measure hydraulic conductivity of soil, 2 samples ( read more ).....
10-01528 Toronto, ON Physical Laboratory needed to test paint applied to a building corridor to determine whether the installed product is in accordance with specifications. ie. is the paint a primer or finish coat? how many coats? type of finish? quality of paint? ( read more ).....
10-01521 Midwest USA Materials Laboratory needed to compare the physical, analytical, and performance characteristics of aerosol brake cleaners. ( read more ).....
10-01518 EPA Analytical Chemistsry Laboratory needed for EPA testing OPPTS 830 series for insect repellent (DEET) balm-like product. Specifically, request quote for following tests: Color (6302), Physical State (6303), Odor (6304), Oxidation/Reduction (6314), Flammability (6315), Explodability (6316), Storage Stability (6317), Miscibility (6319), Corrosion (6320), Dielectric Breakdown (6321), pH (7000), Viscosity (7100), Density (7300). ( read more ).....
10-01488 USA Physical Laboratory needed for testing Polish Stone Value of coarse aggregate in accordance to ASTM, recommend the use of BS Series/doc. No BS BS 812-114: Polished Stone Value - Test Procedures and Equipment - [ Traducir esta página ] Aggregate Abrasion Value Polishing Stone. ... American Society for Testing Materials (ASTM), recommend the use of BS Series/doc. No BS BS 812-114 to determine Polish Stone Values. ... ( read more ).....
10-01478 USA Physical Laboratory needed to test PVC industrial coated polyester fabric in accordance to ASTM D2582 for MSHA approval. ( read more ).....
10-01450 USA Physical Laboratory needed for TMA testing using penetration probe to study thermal characteristics over temp range RT to 150C on polymer film materials, ten samples. ( read more ).....
( read more ).....
10-01394 Physical Laboratory needed for water vapor transmission of paint and plastic film, thermal conductivity and shrinkage of glass reinforced plastics testing. ( read more ).....
10-01352 India Physical Laboratory needed for Thermic fluid testing for boiler. ( read more ).....
10-01335 Physical Laboratory needed to do pressure filter value testing for color master batches based on polymers like PP, PE, LLDPE etc. ( read more ).....
10-01309 USA Physical Laboratory needed for materials testing: MVTR, WVTR, Mullen Burst and Air Permeance testing. ( read more ).....
10-01307 USA MIL Laboratory required to test one sample of a 15w40 diesel motor oil for Physical (API Spec CJ-4) test & Performance in accordance to MIL-PRF-2104H. ( read more ).....
10-01278 Ontario, Canada Physical Laboratory required for FTIR Scan on three copolymer pressure sensitive tapes (backbone SEBS,butyl etc). ( read more ).....
10-01252 USA Physical Laboratory required for UV protectant testing on a soft material - there will be two samples. ( read more ).....
10-01244 Canada, Europe,or USA Physical Laboratory required for hot temperature tests 1000°C for sensors on exhaust line with water immersion, thermal shocks... ( read more ).....
10-01234 Physical Laboratory required for testing plastic film for DSC, Seal curves, Hot tack, Composition analysis, FTIR, Clarity, Haze, Tensile,COF ( read more ).....
10-01228 USA Physical Laboratory required for ASTM D 3349 testing on black PVC jackets on completed cable- shall have a minimum absorption coefficient of 280 when tested at 375 nm per ASTM D 3349 ( read more ).....
10-01226 USA Physical Laboratory required to measure diameters and take pictures of emulsified oil droplets in water. ( read more ).....
10-01223 Europe Non-GMP Physical Laboratory required for 1.Cascade Impactor Test, inhalation, to determine aerodynamic particle size. 2. Other method to determine cohesivity, electrostatic properties of powder ( read more ).....
10-01218 ASTM Physical Laboratory required to test the material in SRI - 78 uder ASTM C 1549 & ASTM C 1351. ( read more ).....
10-01164 ISO A2LA Physical Laboratory needed for Federal Aviation Regulation # 25.853a Flammability Testing prefer ISO accredited laboratory or A2LA-accredited. ( read more ).....
10-01158 ISO physical laboratory needed for ISO 8669 Testing of urine bag to test as per ISO 8669. ( read more ).....
10-01125 Physical Laboratory needed for EN Packaging Testing to RCV Top Load Strength 1. RCV Top Load Strength_450da N MINI _NFH 13 0012. COBB/Water Absorption_1800s/300s/150g maxi_NF EN 20 535 2. COBB/Water Absorption ( read more ).....
10-01117 India Physical Laboratory needed for Glass Testing: Optical testing, Toughness testing, Transperecny testing, Magnification etc ( read more ).....
10-01105 WYOMING GEOLOGICAL LABORATORY NEEDED FOR RAW SAND SIZE TESTING AND PHYSICAL TESTING: HF SOLUBILITY, KRUMBEIN ROUNDNESS, SPHERICITY, BULK DENSITY, SPECIFIC GRAVITY, API CRUSHING TEST at PERCENT 2000PSI, 3000PSI, 4000PSI, 5000PSI ( read more ).....
10-01092 Saudi Arabia ISO Physical Laboratory needed for physical properties testing of wood used for pallet manufacture ( read more ).....
10-01081 Physical Laboratory needed for Interlab comparison to be conducted on cement and require z score to be calculated. ( read more ).....
10-01029 Asia ISO 9001 or ISO17025 Physical Laboratory needed for ISO 5011 Filter Testing Air Filter ISO 5011 Life, Eff and Restriction Fuel Filter SAE J1488 Fine water removal SAE J905 Capacity SAEJ1985 Eff Lube Filter ISO J16889 Multipass ISO 4548 Collapse, Restriction This requirement will be a long term engagement. If this requirement matching for your organization. We request you to please get back to us with your detail capability brochure. ( read more ).....
10-01024 Ireland UKAS physical laboratory needed for u-value testing and strength testing ( read more ).....
10-01001 India Physical Laboratory needed for failure analysis testing of shrinkage defect in our cylinder head cast iron castings to eliminate the defect we have to identify the exact reason for it. ( read more ).....
10-00968 Malaysia Physical Laboratory needed for vibration testing for 10 minutes. The direction of the vibration is to be perpendicular to the plane of the SEM I/O boards. The random vibration spectrum shall be: 20-80 Hz at 3 dB/octave rise 80-350 Hz at 0.04 g2/Hz acceleration spectral density 350-2000 Hz at 3 dB/octave roll off ( read more ).....
10-00956 Physical Laboratory needed for IEC Testing: Glow/hot wire & flamability testing for end products to IEC 60695-2-11 ( read more ).....
10-00919 Australia Physical Laboratory neeeded for stability testing and annealing testing ( read more ).....
10-00918 ISO 9001:2000 Certified Physical Laboratory need for weatherability test to NFC 33 209. ( read more ).....Closed
10-00913 Physical Laboratory needed or testing turbine oils for approval that oil suitable for our turbine. we use shell oils but shell company stop business in sudan now we looking for another company but we need to test the oil first. ( read more ).....Closed
10-00912 Physical Laboratory needed for testing several sizes checked of both CCA and CCS both stranded and single wires, directly after cladding and after drawing. CCA 2.97mm, 3.66mm, 4.11mm, 5.19mm, 8.25mm, 19.05mm. CCS 30% & 40% single wires, 3.264mm, 4.115mm,5.83mm. Stranded sizes 19 x 6awg, 19 x 9 awg, 7 x 6awg, 7 x 9awg, 3 x 6 awg in 30% and 40%. We need these tested at 20° C, 75° C, and 150° C Would you also be able to test some CCA using Young's modulus of elasticity? Also can you check the rate ( read more ).....Closed
10-00897 Physical Laboratory needed for acoustical testing, ASTM E492 test report from qualified acoustical test lab on hardwood flooring with the under mat for use in 2nd floor of a building. The acoustical test report must be for an open web wood truss floor / ceiling assembly. Test reports for concrete, steel, or other types of construction are not sufficient. ( read more ).....
10-00889 Physical laboratory neeeded for abrasion resistance, compression set and recovery, cracking resistance * slip resistance * sole adhesion * any required US customs tests ( read more ).....
10-00881 Europe physical laboratory needed for EN 15152 Testing of Windscreen for HSR. All optical and physical tests required in EN 15152:2007. Except impact test. ( read more ).....Closed
10-00878 Turkey University needs Physical Laboratory for Mossbauer measurments at Rt and 80K ( read more ).....
10-00814 India ASTM physical laboratory to test performance of grease ASTM D-4693/ IP 186 and Life performance of wheel bearing as per ASTM D-3527 of Grease. Requesting quote, terms and condition for testing the performance of grease for low temp torrque as per method ASTM D-4693/ IP 186 and life performance of wheel bearing as per ASTM D-3527. ( read more ).....Closed
10-00774 US laboratory to conduct complete range of physical tests from course and wale count to FR using DIN test methods. ( read more ).....Closed
10-00757 India NABL Physical Laboratory needed for certification testing of stainless steel Bands / Buckles / Clips (For coating purpose material used as Black PPA - Thermoplastic and Black Polyester) made by using material SS201 / SS304 / SS316 /SS317L / MONEL 400 / CARBON STEEL. Please note that for all test shall passed standard of complies with IEC 62275:2006-10 with the sub clauses : 9.1, 9.7, 9.7.1, 9.7.2, 9.7.3, 11, 11.1, 11.2. Pls confirm that test report should clearly indicate if the pro ( read more ).....Closed
10-00721 Australia Physical Laboratory needed for Microhardness Testing (scientific method) Chemical Analysis Plating Thickness Plating Types Materials: Case Hardened Steel Case Hardened BoronSteel Stainless Steel ( read more ).....Closed
10-00712 India Physical Laboratory needed for weatherability testing as per NES M0135 Method-1, Class-3A. Appearance Test using sunshine carbon weather-o-meter 300h Physical Property: 600h Black Panel Temperature 83±3°C. ( read more ).....Closed
10-00711 USA Physical and Product Safety Laboratory needed for NFPA and ASTM Testing for NFPA130 for the cable flame/smoke and toxicity test ( read more ).....
10-00710 USA Physical Laboratory needed for leakage testing to detect extremely slow leakage, if any, from a 12oz aluminum 1800psi cylinder of argon gas closed by a couple of different types of on/off valves and pin valves. These cylinders lose pressure over extended time and do not show leakage in a simple water bath test. ( read more ).....Closed
10-00703 EUROPE ASTM PHYSICAL LABORATORY NEEDED FOR NFPA AND ASTM TESTING TO NFPA 130 ASTM E162 AND ASTM E662 TEST WILL BE DONE FOR GELCOATED FINISH SURFACE FRP PART AND PAINTED WITH PU BASED PAINT PHENOLIC PART ( read more ).....Closed
10-00700 Middle East Physical Laboratory needed for physical testing to BS EN Standards: microdeval coefficient,freeze/thaw resistance, impact value to BS EN 1097-1, annex E of 13450, BS EN 1367-1 Annex F, BS EN 1367-2 Annex G, BS EN 1097-2-1998 Clause 6 Annex D ( read more ).....Closed
10-00699 Industrial parts washer manufacturer needs physical laboratory for cleanliness testing of industrial parts to match customer's millipore spec ( read more ).....Closed
10-00693 West Coast Physical Laboratory needed for ASTM Flammability Testing to ASTM D2859 - flammability of finished texture floor covering materials ( read more ).....Closed
10-00691 Eastern USA FDA GLP Physical Laboratory needed for measurement of auto-ignition temperatures on 10 fragrance oil mixtures. ( read more ).....Closed
10-00663 USA Biophysical Laboratory needed for Medical Product Stress Testing for construction of the product and weight limitations, (weight support specs) and tox clearnace concerns ( read more ).....Closed
10-00646 USA Physical Laboratory needed for National Fire Protectoin Agency NFPA Testing of EDPM Blended rubber for NFPA Code 90b smoke test. ( read more ).....Closed
10-00642 Asia Physical Laboratory needed for testing of Density,Water Basorbtion,Tensile Strength and elongation at breaking,tear strength,Deflection Temparature of Plastiscs under Flexural Load,Comppressive strength,Melt Flow Index,Melting Point(Tm),Thermal Conductivity (9 test method) ( read more ).....Closed
10-00631 Physical Laboratory needed for vibration testing of vibrational transmission from a golf putter head to ball strike through the putter shaft and into the grip. ( read more ).....
10-00628 Middle East Mechanical Laboratory needed for ASTM Physical Testing, corrosion, mechanical testing replica, metallugraphy ( read more ).....Closed
10-00623 India Physical Laboratory needed for ASTM Testing, ASTM C1036-06 Solar Radiant Heat % - for direct penetrate, reflectivity, absorb and total penetrate. 2. Visual light transmission , reflectivity & opacity. 3. Shading coefficient, u-value (w/ m2k) measurement 4. Sound insulation (db) measurement 5. Elasticity Modulus (Gpa) 6. Rupture Modulus (Mpa) 7. Knoop hardness measurement. ( read more ).....Closed
10-00621 Eastern China Physical Laboratory needed for FMVSS 201Testing for automotive interior parts ( read more ).....Closed
10-00614 Large Automotive Mfg needs Russia Physical Laboratory for automotive component testing sunroof and cockpit Operating Noises, Squeaks and rattles caracterisation Resistance to insolation for trim parts Vibration and climatic ageing (detection of spurious noises, appearence defects, fastening defects ( read more ).....Closed
10-00597 Physical Laboratory needed for ansi impact test for z87 or z87+ rating compliance ( read more ).....
10-00593 Canada Physical Laboratory needed for MIL-810F Antenna vibration testing, loose cargo and blowing rain testing ( read more ).....Closed
10-00576 Asia Physical Laboratory needed for API 5L SR6 of API 5L Drop Weight Tear Test performed in pipe body shall exhibit a minimum fracture appearance shear area of 60% on any test. No individual specimen shall exhibit less than 50% shear area. ( read more ).....
10-00498 Physical Laboratory needed for ASMT Testing, ASTM E-84, flame spread and smoke developed index ( read more ).....Closed
10-00479 Europe Physical Laboratory needed for Biaxial dynamic testing for austenitic stainless steel materials. ( read more ).....
10-00465 India Physical Product Safety Laboratory needed for Mechanical Shock & Vibration Test with dummy load, Ingress Protection (IP-55),& Pressure test at 5kg/cm2 on mechanical cabinet of approx.sizes 1850x500x415 ( read more ).....Closed
10-00460 Physical Laboratory needed for RTCA/DO-160E testing. ( read more ).....Closed
10-00452 KSA Physical Laboratory needed to certify the load capacity of the tirak and its accessories in a yearly basis and inspections in 6 monthly basis. ( read more ).....Closed
10-00450 Physical Laboratory needed for bolt testing up to 48mm - assembly (bolt,nut and washer strength). ( read more ).....
10-00446 India Physical Laboratory needed for testing energy efficiency for star rating of air conditioners. ( read more ).....Closed
10-00445 India Physical Laboratory needed for raw material testing for plastics pvc or pet. Required testing: tear, tensile, haze, shrinkage, co- efficient(dyanamic, static). ( read more ).....Closed
10-00438 Power and Energy Company needs physical laboratory for testing octane level E-10 gasoline ( read more ).....Closed
10-00432 UK Physical Laboratory needed for Rub testing, Blue Wool Scale testing and testing for the ignitability of upholstered composites for seating. ( read more ).....
10-00430 Washington Physical Laboratory needed for ongoing wash testing on clothing articles to determine appearance after multiple washes, as well as shrinkage factor. ( read more ).....Closed
10-00429 Physical Laboratory needed for testing abrasion - Abrex Machine. 30k cycles @ 5N load, no paint wear through. ( read more ).....Closed
10-00427 Physical Laboratory needed for melt viscosity testing on a glass filled acetal part that fractured and compare the results to a good part. ( read more ).....Closed
10-00424 USA or China Physical Laboratory needed for ETL Fire Resistance Safety Testing, 30-minute fire resistance safe test ( read more ).....Closed
10-00417 Physical Laboratory needed for migration testing of laminate under US FDA and EU parameters. ( read more ).....
10-00407 India Physical Laboratory needed for welding strength testing to check CO2 WELDING. ( read more ).....
10-00402 India Physical Laboratory needed for Thermal insulation testing of thermal insulation Paint/Coating. ( read more ).....Closed
10-00398 Canadian Physical Laboratory needed for testing viscosity and surface tension of bio-diesel fuels at pressures up to 1000 Psi and temperatures up to 250oC ( read more ).....Closed
10-00380 USA Packaging Laboratory needed for physical properties Testing of paper shopping bags: materials, burst strength tests, folding endurance, tear strengths, colorfastness tests (dry and wet), workmanship quality test, toxics testing. ( read more ).....Closed
10-00368 Texas Physical Laboratory for testing moisture vapor transmission rate. ( read more ).....Closed
10-00363 Canada, USA Physical Laboratory needed for vibration testing rubber isolator that requires the natural frequency to occur at 11Hz under load. We need this verified. ( read more ).....Closed
10-00362 Physical Weathering Laboratory needed for testing treat Ipe (wood) decks and have them weathered, in a lab, for a year to judge results. ( read more ).....
10-00351 Physical Laboratory needed for weld testing (mag particle, die penetrant, X-ray). ( read more ).....Closed
10-00345 Physical Laboratory needed for failure analysis of a polyurethane material for litigation. We have the failure of a polyurethane material and need to find out what exactly failed. ( read more ).....Closed
10-00331 USA FDA GLP Physical Histology Laboratory needed for side by side comparison of cardiovascular devices testing against a predicate to substantiate equivalency claims for labeling. Various models and analysis. ( read more ).....Closed
10-00317 Middle Eastern Physical Laboratory needed for testing cable trays and cable ladders as per IEC 61537. ( read more ).....
10-00315 India Physical Laboratory needed for NFC 33020 routine testing of insulation piercing connectors as per NFC 33020 standards. Mechanical tensile strength, electrical current carrying capacity, enviornmental testing (corrosion/water immersion test etc). ( read more ).....Closed
10-00314 Asia IEC Physical Laboratory needed for testing a cast resin medium voltage insulator for Hv Frequency, Wet & Dry. Testing for impulse and power frequency and tensile strength. ( read more ).....Closed
10-00312 US Physical Laboratory needed for testing for ANSI IEC 61537 certification for steel cable trays, cable ladders, and channel support systems. ( read more ).....Closed
10-00303 Physical Laboratory needed for Nissan NDS 4.5.10 testing. Testing includes: Rainy Weather Driving / Continuous Rapid Cooling Car Washing ( read more ).....
10-00301 Quebec Physical Laboratory needed for testing chain assembly to establish breaking point up to 400kN. ( read more ).....
10-00300 India or Asia ASTM Physical Laboratory needed for testing crushed PET flakes. Testing required for, (1)Average grit size, (2)Dust(<1mm particles) content, (3)Moisture content, (4)Intrinsic Viscosity (IV value), (5)Bulk density, (6)PVC content, (7)Polyolefin content, (8)Sugar content (9)MFI value ( read more ).....Closed
10-00293 USA Physical/Chemical Laboratory needed for testing polyethylene caps that are cracked. Need to know if they are cracked due to raw material defect or other reason. Will also require resistance testings on some of them. ( read more ).....Closed
10-00289 Indian Physical ASTM Laboratory needed for testing MVTR of polyester film. ( read more ).....Closed
10-00270 USA Physical Laboratory needed for testing a UV-C Scanner. Want to test claims made by manufacturer prior to distribution. ( read more ).....
10-00268 USA Physical Radiochemistry Laboratory needed for radiation emissions testing from foam with Tourmaline. ( read more ).....Closed
10-00264 Canadian Physical Laboratory needed for Solar radiation testing. Test procedure: MIL-STD-810G Method 505.4 Procedure I, with climatic condition A-1 (according to MIL-HDBK-310). Coupon description: Composite panel, 305 x 305 x 53mm. ( read more ).....Closed
10-00263 Physical Laboratory needed for EN 15152 testing gravelling impact resistance on Front windscreens for train cabs ( read more ).....
10-00253 Nanotechnology Physical Laboratory needed for heat deflection testing and heat distortion of polymer nanocomposite materials. ( read more ).....
10-00251 California Physical Laboratory needed for tensile testing, vibration testing, impact testing, compression testing and relaxation testing of yoga mats. ( read more ).....
10-00250 USA Physical Laboratory needed for ASMT D92 testing for fire point of a water-base concrete curing compound. ( read more ).....Closed
10-00236 Canada Physical Laboratory needed for BS EN 13823 flammability testing for wood siding ( read more ).....Closed
10-00223 Physical Laboratory needed for UV testing printing papers and laminate products from China. ( read more ).....
10-00196 USA Physical Laboratory needed for AMS testing against AMS-T-81914 standard ( read more ).....Closed
10-00165 Physical / mechanical laboratory needed for ISO8688 testing, Tool wear testing ( read more ).....Closed
10-00141 Physical Laboratory needed for tensile testing on mild steel plates. ( read more ).....
10-00120 Analytical Chemistry Laboratory needed for pesticide testing, ad hoc analyses of physical-chemical characteristics of pesticides and/or fomulations. I will need to know flame point, boiling point and the satbility of the emulsion. Are you able do perform these analyses? If yes please give me information about the accreditation status, price and delivery time (TAT). ( read more ).....
10-00116 Medical Device Physical Laboratory needed for EN 12478-3 thermometer accuracy testing ( read more ).....Closed
10-00095 Massachusetts Physical Mechanical Laboratory needed for testing ISO 594-1 Luer fitting ( read more ).....
10-00069 Middle East Physical Laboratory needed for Wear testing needed on materials. ( read more ).....
10-00040 Large Chemical Mfg needs Physical Weathering Laboratory for exterior weathering testing with exposure in multiple climates and evaluation of coated substrates. ( read more ).....Closed
10-00037 NJ physical laboratory needed for ASTM A578 level B S-1GE Spec B50A656C testing of plate 1s 2 thick x 52" OD ring ( read more ).....
10-00028 Physical Laboratory needed for Fire Resistance Testing ( read more ).....
10-00008 Physical Laboratory needed for Explosive Limit(LEL) Testing of gas mixture. I have done some research and found out that this may be able to be found using LeChatelier's Law. ( read more ).....
10-00007 Physical Laboratory needed for chemical testing of 11 A-B flash powder kits 1 oz ea. We need to have them tested for composition type, as well as, percent of composition. ( read more ).....
09-2536 France Physical, Materials Laboratory needed for NFC 33-209 Testing of aerial bundled cables ( read more ).....
09-2501 South Carolina Area Physical Laboratory needed for Accelerated weathering and colorfastness testing, measurement of textile (nylon) Particular emphasis on coloristics after UV exposure (degree of fade) ( read more ).....Closed
09-2491 Physical Laboratory needed for SAE J2027 Testing, Burn-Through resistance ( read more ).....Closed
09-2485 USA Physical, Mechnical Laboratory needed for Mechanical Testing: Tensile AND Torsion Testing required for Friction Welded Joint. I have 3 different companies supplying samples. I want to compare welds. ( read more ).....Closed
09-2481 Physical Laboratory needed for Non-Destructive, NDT Testing, eddy current testing of stainless steel castings" ( read more ).....
09-2478 Saudi Arabia physical laboratory needed for ASTM Physical properties testing FRP materials ( read more ).....Closed
09-2465 Physical Laboratory needed for weathering testing, sun shine weather meter testing ( read more ).....
09-2464 Eastern USA Physical Laboratory needed for ASTM D-4206 TESTING FOR SUSTAINED COMBUSTIBILITY ( read more ).....Closed
09-2428 Midwest Physical Laboratory needed for JIS or ASTM Vibration Testing within a controlled temperature of +5C. ( read more ).....Closed
09-2394 Mississauga Mechanical Physical Laboratory needed for ASME Testing of Boilers to MIL-PRF-25567E Appendix A from the asme boiler and pressure section V To test our leak detector fluids to determine if the support mold growth, ( read more ).....Closed
09-2385 ASIA PHYSICAL LABORATORY NEEDED FOR ASTM EDDY-CURRENT TESTING OF CONDENSER AND LOW PRESSURE/HIGH PRESSURE HEATERS OF POWER PLANT ( read more ).....Closed
09-2384 Physical Laboratory needed for ASTM Testing needed for ASTM deep drawing test,stack test,cyclic test,paint adhesion,impact,cupping test,boiling water test. All these test will be carried out on galvanized sheet. ( read more ).....Closed
09-2367 Israel physical weathering laboratory needed for optical testing of substrate that contains ~ 700 millimeter sized CPC optical elements. Whish to test actual performance under one sun conditions and compare to reverse ray analysis. ( read more ).....Closed
09-2361 Physical Laboratory needed for ASTM Testing of fabric, ASTM D3776, Tear Strength ( lbs W x F) - ASTM D1424, Tensile Strength ( lbs W x F ) - ASTM D5034, Laundry Shrinkage ( W x F) - ASTM 1506, Vertical Flame - ASTM D6413, Thermal Manikin - ASTM F1930 Air Permeability - ASTM D737, ASTM 1959 - Arc Rating of Materials for Clothing ( read more ).....
09-2342 Asia Physical laboratory needed for Stress rupture testing ( read more ).....Closed
09-2334 North America Physical Laboratory needed for Straight Line pull, Tensile of a rubber tarp strap at , ambient, -40 F and + 300 F, ( read more ).....Closed
09-2316 USA Physical Laboratory needed for Flammability testing NFPA701 on fabric used for the manufacture of interior window coverings ( read more ).....Closed
09-2303 Physical Laboratory needed for NFPA Testing and ASTM Testing of electronic equipment under NFPA 130, ASTM E 162 and 662. ( read more ).....
09-2244 India Physical Laboratory needed for metallurgical testing: grain structure , elongation, tensile strength, hardness , resistance of copper strip ( read more ).....Closed
09-2235 Southwest USA Metallurgical, Geolophysical Laboratory needed for size fraction analysis of ore. ( read more ).....
09-2232 ISO Physical Laboratory needed for ISO 594-2 tests on male conical luers to demonstrate ISO 594-2 compliance. ( read more ).....Closed
09-2229 California Laboratory needed for physical testing: VPX Vapor Pressure D 6378-08 ( read more ).....Closed
09-2228 Large Chemical Mfg needs USA/Canada Materials Laboratory packaging testing for Materials ID and physical/mechanical properties of Super-sack bag for failure analysis ( read more ).....Closed
09-2213 Eastern USA Physical Materials Laboratory needed for polyurethane testing, Stiffness of .142" OD Polyurethane tubing. Specification: 15,000 PSI maximum, condition samples at 23+or-2 degrees C & 50+or-5%RH, 16 hrs min before testing. Equipment: Tinius-Olsen stiffness tester. Samples: 30 ( read more ).....Closed
09-2209 USA Physical Materials laboratory needed to soak 30 products in diesel fuel for 1000 hours at 220 F ( read more ).....Closed
09-2170 India Physical Laboratory needed to test digital electronic balance ( read more ).....Closed
09-2134 Product Safety Laboratory required to handle chemotherapy drug devices (IV bags, solution bottles, connectors, and tube sets that could possibly have sharps attached) to confirm customer complaint issues. This would involve physical review of the product and provide photographic evidence of the defect if applicable and then dispose of the product. A lab that can also provide safe shipping of this product would be ideal. ( read more ).....Closed
09-2126 USA GLP Preclinical Contract Research Organization required for the following: Physical examination - qualify the subject companion animals as healthy and cancer free; get body score/weight Laboratory tests: Hematology, blood chemistry, thyroid function tests, fecal examination, urinanalysis Blood collected and stored for genetic testing (aliquots) DNA Serum collected Tumor collected and cancer type verified ( read more ).....
09-2051 Europe GMW 3417 Physical Laboratory needed to test the interior car carpet for natural weathering exposure ( read more ).....Closed
09-2033 UK BS EN ISO MATERIALS/TEXTILES LABORATORY REQUIRED FOR (BS EN ISO 12947: 1999 part 2 - MARTINDALE ABRASION (2) BS EN ISO 13937-3: 2000 - TEAR STRENGTH (3) BS EN ISO 13934-1: 1999 - TENSILE STRENGTH (4) BS EN ISO 13936-2: 2004 - SEAM SLIPPAGE (5) BS EN ISO 12945 : 2000 - PILLING (6) BS EN ISO 105-B02 : 1999 - COLOUR FASTNESS TO LIGHT (7) BS EN ISO 105 - X12 - COLOUR FASTNESS TO RUBBING (8) BS EN ISO 105-E01 - COLOUR FASTNESS TO WATER) FULL PHYSICAL TEST CERTIFICATE FOR OUR QUALITY LINETTA AND BS ( read more ).....Closed
Full physicall test report on our quality LINETTA ( read more ).....Closed
09-2020 Chicago preferred Physical Laboratory needed to measure the surface roughness, surface porosity, and surface hardness of various coated surfaces. ( read more ).....Closed
09-2019 USA Physical Laboratory needed for ASTM D6493 testing Ring and Ball Softening Temperature ( read more ).....Closed
09-2006 USA ASTM Physical Laboratory needed to test the sealing integrity of a chemical adhesive to be used for eye surgery ( read more ).....
09-1802 Analytical Chemistry Laboratory required to determine the following physical properties on petroleum oil samples; molecular weight, heat of vaporization, and vapor pressure versus temperature between 90°C and 160°C. ( read more ).....Closed
09-1785 USA or Canada Physical/Packaging Laboratory required for Oxygen Transmission Rate; Moisture Vapor; Transmission Rate; and Tensile Strength. ( read more ).....Closed
09-1756 ASTM D4206 Physical Laboratory required to run a sustained burn test (ASTM D4206) on a liquid paint sample? ( read more ).....Closed
09-1755 NABL Materials Laboratory required for testing of physical and chemical properties of construction material ( read more ).....Closed
09-1751 Geophysical Laboratory required for geophysical survey for diamond at Panna. ( read more ).....Closed
09-1741 Certified(ASME Section VIII Part UG-131) Physical Laboratory required for Relief Valve capacity testing, steam testing up to 2.2 million pounds per hour. Would like immediate capabilities response for quotation purposes. ( read more ).....
09-1697 Geophysical Laboratory required for geophysical survey for diamond at Panna. ( read more ).....Closed
09-1683 ASTM Physical Laboratory required for Thermal vacuum outgassing as per ASTM E595 ( read more ).....Closed
09-1629 California Product Safety Laboratory required for the following testing: astm f963 physical test flammability f96 total lead and soluable heavy metal f963 lead in substrate cpsia phathaltes cpsia ( read more ).....Closed
09-1579 Eastern USA Physical Laboratory required for Fisherscope hardness, N/mm^2 ( read more ).....Closed
concrete aggregate physical property testing ( read more ).....Closed
09-1484 Cosmetic and personal care ingredient manufacturer needs a Product Safety Laboratory to run Annex VII tests of REACH on products. Annex VII includes biodegradation, physical/chemical state, and toxicology. ( read more ).....
09-1424 ISO Materials/Physical Laboratory required for ISO 811- hydrostatic head pressure test ( read more ).....Closed
09-1386 USA and CANADA ASTM Materials/Physical Laboratory needed for Nitrile Examination glove physical property--Tensile Strength and Elongation ASTM D6319 ASTM D412 ASTM D573 ( read more ).....Closed
09-1361 UAE ASTM Physical/Environmental/Microbiology Laboratory needed for testing 1. RESISTANCE TO WEATHERING: ASTM G26, EXNON ARCLAMP, 2. PRACTICE FOR OPERATING LIGHT EXPOSURE WITH AND WITHOUT WATER: ASTM G26 METHOD A, TYPE B, WEATHER-O-METER 3. DETERMINATION RESISTANCE OF SYNTHETIC POLYMERIC MATERIALS TO FUNGI: ASTM G21-1996 ( read more ).....Closed
09-1352 India ASTM Physical Laboratory needed to test Ultra high molecular weight polyethylene for: Density, Tensile strength, Yield strength, Elongation, Hardness, Ash content, Izod impact ( read more ).....Closed
09-1306 Ontario (near TO) Physical Laboratory required for testing a spline/spline nut assembly. The spline must be fixed so that it cannot rotate. The spline nut is injected with nylon to form the female spline geometry. The spline nut will be rotated on the spline to determine the point that the injected nylon fails. ( read more ).....Closed
09-1194 USA Physical Materials Laboratory needed for ASTM B611 testing the wear on several different types of ceramics ( read more ).....Closed
09-1182 Calgary Canada Physical Laboratory needed for testing Kitchen cabinet doors and panels wood venerer craked due to site conditions ( read more ).....Closed
09-1154 we need to have right material properties: - Front Rails - B-Pillar - Rocker - Dash/Footrest area - Floor Regarding Automotive mfg needs physical laboratory for materials properties testing we need to have the dynamic stress-strain with strain-rate dependent curves ( at the strain-rate of 5 mm/min, 50 mm/min, 500 mm/min) ( read more ).....Closed
09-1152 UK materials laboratory needed for physical testing of self adhesive films against various criteria, peel strength, opacity, weathering, initial & ultimate adhesion,gloss levels, temperature resistance, salt spray,flexibility etc. Can you please respond with details of testing facilities you have, properties you can measure, costs & timescales. We anticipate a range of approximately 10 different materials applied to 6 different surfaces. This is for a major 'blue chip' client who will be heavil ( read more ).....Closed
09-1151 Packaging laboratory needed for physical properties testing of woven polypropylene laminated bags. ( read more ).....Closed
09-1140 Manufacturer of compressed air filters and elements needs physical mechanical laboratory for ISO12500 validation testing of the filtration performance of our products according to ISO-8573.1 ( read more ).....Closed
09-1135 Major Medical Device Manufacturer needs ISO biophysical laboratory to ensure denture cleanser products to ensure they do not corrode the metal components of some partial dentures as well as discolour the dentures for claims support ( read more ).....Closed
09-1134 USA Physical Laboratory needed for ISO 20566 Scratch resistance testing of paint (car wash test) ( read more ).....Closed
09-1105 Canada Materials Laboratory needed for ASTM Testing, ASTM E143-87 shear test of 5/8" and 3/4" bolt ( read more ).....Closed
09-1098 USA Physical Laboratory needed for IEC 60332 Fire retardant testing of different cable: 1.5mm˛xsingle core stranded /flexible FR cable, 5mm˛xsingle core stranded /flexible FR cable, 1.5mm˛x2 core stranded /flexible FR cable 4) 2.5mm˛x 2 core stranded /flexible FR cable ( read more ).....Closed
09-1097 India analytical chemistry laboratory needed for chemical analysis & Physical property test ( read more ).....Closed
09-1091 NY / NJ Physical Laboratory needed ASME Hydrostatic burst test to ASME SEction VIII, Div. 1, UG-101, up to 18,000 psi of a pressure regulator fitting. ( read more ).....Closed
09-1080 US EPA, FIFRA, OECD GLP needed for Pesticide storage stability & cold stability testing to CIPAC methodology, including physical properties for granular, solid, and liquid formulations. May include method development and validation. ( read more ).....Closed
09-1069 ISO Physical laboratory needed for testing of a female and male Luer attachments per ISO 594/2 ( read more ).....Closed
09-1019 Eastern PA Metallurgical Laboratory needed for Chemical Analysis of grate key metal for carbon, silicon, phosphorus, sulfur, molybdenum - high silicon ductile iron with molybdenum as per A536, Grade 65-45-12. Physical Characterisics of Stoker Key metal consisting of Brinell Hardness of 240; Tensile Strength > 35,000 psig, elongation 10% max., ash softening temp of 2650 degrees F. ( read more ).....Closed
09-1003 Asia Physical Laboratory needed for ASTM Testing, Izod Impact ( ASTM D256 ) ( read more ).....Closed
09-0991 Ice Cleat Mfg needs product safety, physical laboratory to determine if their tungsten carbide spike will create a spark sufficient enough to ignite flammable liquids, gases, dust, or other materials when worn under normal use. Thanks. Jim Smaaland Sure Foot Corporation 1-800-722-3668 jim.smaaland@surefoot.net ( read more ).....Closed
09-0938 Malaysia Materials Laboratory needed for DIN or ASTM Testing, Coefficient Friction Test ( read more ).....Closed
09-0923 India Microbiology Laboratory needed for ASTM, ISO and IS testing of water based metal working fluids and physical properties of hydraulic oils and compressor oils. ( read more ).....Closed
09-0900 USA Physical Laboratory needed for extreme swing testing, wood cabinet doors in different climatic conditions. ( read more ).....Closed
09-0898 US Physical, Environmental Laboratory needed for wind tunnel testing forvibration of metal railings ( read more ).....Closed
09-0884 India Geophysical laboratory needed for ASTM Granite Physical property check as per ASTM C 615 ( read more ).....Closed
09-0875 Physical Laboratory needed for Mil Spec C5040 Testing of parachute cords. ( read more ).....Closed
09-0869 Wires & Cables & PVC Cable Manufacturer needs physical laboratory for IEC60502 flammability testing: Low Smoke Flame retardent tests like Holgen contents & Temperature Index. ( read more ).....Closed
09-0868 Asia physical laboratory needed for Halogan Contents Test, Temperature index Test of Low Smoke Flame Retardant PVC Compound ( read more ).....Closed
09-0862 USA PHYSICAL LABORATORY NEEDED FOR ASTM E84 TESTING, STANDARD FLAME SPREAD AND SMOKE DENSITY TESTING ( read more ).....Closed
09-0859 Plastics Manufacturer needs Tennessee Physical Laboratory for Load testing an undergroud box for stormwater detention ( read more ).....Closed
09-0854 INDIA ISO PHYSICAL LABORATORY NEEDED FOR MULTIAXIAL IMPACT TESTING ( read more ).....Closed
09-0833 ISO India Physical Laboratory needed for fabric flammability test in indian standard-15061 (horizontally) ( read more ).....Closed
09-0832 USA Physical Laboratory needed for ANSI Z87.1-2003 Testing ( read more ).....Closed
09-0824 Africa Physical Laboratory needed for physical testing of petrol, Diesel, Motor oil, Biodiesel, Jet fuel ( read more ).....Closed
09-0821 USA GLP Analytical Chemistry Labroatory needed to test physical properties: Flash point, LEL, vapor pressure, boiling point, stability (pH, photolaability, heat, oxidizer) and container stability/gloves ( read more ).....Closed
09-0794 PHYSICAL LABORATORY NEEDED FOR NON-DESTRUCTIVE TESTING, INSPECTION FOR FALLOWING STEEL CONSTRUCTION: I TYPE BEAM I10/22 WITH 50 FT LONG INSTALLED BETWEEN TWO CONCRET WALL IN DISTANCE FROM FLOOR 9FT 2 INCH. THIS BEAM WILL HOLD JUST LITHS. ( read more ).....Closed
09-0781 Toronto Physical Laboratory needed for concrete Strength Testing. ( read more ).....Closed
09-0760 Europe FDA GMP, ISO 17025 physical laboratory needed to analyze the wavelength of 4290nm of Er:YAG laser ( read more ).....Closed
09-0752 Middle East Physical Laboratory needed for testing jet fuel, super petroleum 92, Diesel N62, TC1 Jet fuel, GP8 Jet fuel. ( read more ).....Closed
09-0739 Physical laboratory needed to perform air burst testing of condoms. ( read more ).....Closed
09-0727 USA Physical Laboratory needed for light output testing of UVC wand that consists of a 2.2 Watt UVC lamp housed in a plastic hand-held body. This device will run off of a switching power supply of 6.5V at 1A or a rechargeable 4.8V/ 1500mAh NiMH battery. Light output testing that we have completed shows that we get the optimum output at a distance of 1cm from any desired cleaning surface. Since this expected to be a consumer product, the desired surfaces would be countertops and household fu ( read more ).....Closed
09-0716 UK University needs UK Physical Laboratory for strip and roller friction testing, microhardness, friction determination between contact pairs of; rollers and thin sheet metal strips, aluminum plate and thin sheet metal strips, and hardness of thin sheet metal strip. ( read more ).....Closed
09-0695 USA Physical Engineering Laboratory needed for AR 70-38 snow testing ( read more ).....Closed
09-0689 USA Biophysical Laboratory needed for Compressive testing of a new lateral humeral condyle fracture fixation method. Compressive load application at a rate of 300 N/s until 10mm displacement, 2000 N load or construct failure occurs. ( read more ).....Closed
09-0687 USA Analytical Chemistry Laboratory needed for oilfield testing of a corrosion inhibitor and other products for chemical or physical changes (foaming, gunking) using an autoclave and simulating temperatures and pressures of oilfield conditions. May need to charge the solution with H2S gas. ( read more ).....Closed
09-0682 US Physical Laboratory needed or UN Performance Testing: DOT 7A type A packaging 49 CFR 173.412, 173.415, 178.350 and industrial IP-3 49 CFR 173.411 Type IP-1 49CFR 173.410, 411(a) and (b)(1) ( read more ).....Closed
09-0604 Materials Laboratory needed for physical testing two plastic materials for transmittance and/or absorbance with a spectophotometer. The tube material is opaque in the visible spectrum, so we are interested in frequency ranges where it might appear somewhat transparent. Preferable deliverable is a transmittance spectrum for each material. Please contact me and let me know how much material you would require, lead time, and cost. ( read more ).....Closed
09-0549 Physical Laboratory needed to test coating to measure total solar reflectance from the coating. address: ( read more ).....Closed
09-0547 Spain Physical Laboratory needed for testing solar concentrator mirror designed for a parabolic trough solar concentrator ( read more ).....Closed
09-0513 Physical Laboratory needed for ASTM Testing: ASTM D882 (Tensile strength, Elongation and Modulus of PET sheet)& ASTM D790 (Flexural Strength and modulus for PET Sheet Materials) ASTM D256 (Impact strength for PET Sheet) ASTM D1003 (Light Transmission and Haze for PET sheet) ASTM D648A-B for PET sheet ( read more ).....Closed
09-0510 New Jersey Physical Laboratory needed for testing to determine RMS reading on the I.D. of a piece of carbon steel tubing, 1.000" OD x .810" ID ( .095" wall ) x 1" Long. Must be tested in 4 places on the ID /rms smoothness reading ( read more ).....Closed
09-0497 USA physical, mechanical laboratory needed for ASHRAE Testing of fan like device for dust contamination with ASHRAE test dust #2. Test would be variation on the stadard 52.1 and 52.2 ( read more ).....Closed
09-0481 Large, Multinational Chemical Manufacturer needs California Physical Laboratory for ASTM E-84 flammability testing re plastic plank ( read more ).....Closed
09-0470 US GLP Physical Lab for OOPS, Explodability testing. re: Particle Size for an aerosol .Dielectric Breakdown Voltage/All these test under GLP...oppts 830.6316, 830.7520 and 830.6321 ( read more ).....Closed
09-0449 USA physical laboratory needed for iso 2137:1985 penetration testing for fluidity of waxy material. ( read more ).....Closed
09-0439 India EPA/OPPTS Analytical Chemistry Laboratory needed for Physico Chemical properties data generated on GLP as per EPA/OPPTS, OECD,EEC AND CIPAC for our product : CHLORPYRIPHOS TECHNICAL ( TECHNICAL GRADE INSECTICIDE ). Appearance : Physical state, Colour, Odour - 830.6302/3/4 Melting Point - OECD 102 Solubility in Organic Solvents (at room temperature) - OECD 105 Density - OECD 108 / CIPAC MT 3 Surface Tention - OECD 115 / EEC A5 Oxidising Properties - A.17 Reactivity with Packaging M ( read more ).....Closed
09-0432 Engineering Company needs USA or Canada Physical Labratory for ASTM Testing SAUEREISEN LOW EXPANSION CEMENT # 29, TENSILE STRENGTH PER ASTM C 307-08 ( read more ).....Closed
09-0342 ISO 17025 laboratory to give quotation or testing of fatty acids, fatty alcohol and glycerin following OECD test procedures for physico-chemical properties ( read more ).....Closed
09-0330 Laboratory Incubator Manufacturer needs UKAS physical laboratory for testing temperature of a reagent incubators, one to hold a temperature of 15c +/- 0.5c and the other to hold the temperature of 5.5c +/- 1.0c. ( read more ).....Closed
09-0230 USA Metallurgical Laboratory needed to test physical properties of a Stainless Steel screen mesh. ( read more ).....Closed
09-0187 China Analytical Chemistry Laboratory needed for ASTM Testing all physical & chemical tests for petroleum materials. ( read more ).....Closed
09-0148 USA Mechanical Laboratory required for a load test of a cart. The cart weighs about 100 pounds, we want to know if it can safely hold 4,000 pounds. We have the physical sample that can be destroyed. ( read more ).....Closed
09-0130 USA Physical Laboratory needed for product safety to test any leakage of a cryogenic vial after being immersed in liquid nitrogen. ( read more ).....Closed
09-0107 Indiana USA Physical Laboratory required for some testing. Below are the material and the tests required: .25mm thick polyester sheets: - i'm interested in a stress v. strain curve (elongation) - coefficient of friction for the material acrylic adhesive: - adhesive strength testing with temperature variations between RT to 45 C 12 different papers - stress v. strain curve for compression ( read more ).....Closed
09-0087 Germany Metallurgical Laboratory required for testing physical and chemical properties of the cupro Nickle tubes. ( read more ).....Closed
09-0066 India Physical Laboratory required for Coefficient of Thermal Expansion of FRP Rod used in telecommunication cable. Testing to be done on 3 different diameter rods i.e. 1.00, 2.00, 3.50 mm ( read more ).....Closed
09-0033 Eastern Europe Agricultural Lab required for testing wheat and oil seeds for physical and chemical parameters determination. ( read more ).....Closed
08-2642 India Physical Laboratory needed for Testing of Rigid Polyurithen Foam, Expanded Polystryne and Rockwool for variour parameters. ( read more ).....Closed
08-2641 Canada Materials or Physical Laboratory needed for Tensile and Density Testing of some TPU materials ( read more ).....Closed
08-2574 USA EPA, GLP Environmental Laboratory needed for EPA Herbicide Testing :Glyphostate Tech. EPA registration --"Physical and Chemical properties"test ( read more ).....Closed
08-2568 Arkansas (or near) FDA, GMP, GLP Bioanalytical/Nutritional Laboratory needed for raw material and end product testing for purity, strength, and composition of dietary supplements and for limits on specific contaminants including microbial analysis, and metal content. Good turnaround time on testing is a must. The laboratory should be accessible to a desk and physical audit. ( read more ).....Closed
08-2558 India ASTM Materials Testing Laboratory needed for: Plastics Discoloration Testing Physical Properties Testing Simulated Environmental Exposures Testing Studies Heat Deflection Testing Mechanical Properties Testing Peel Strength Testing Flexure Modulus Testing  Tensile Strength Testing  Elongation Testing  Hardness Testing  Thermal Properties Testing  Solvent Resistance Testing Tensile Modulus Testing  Solubles Testing  Dielectric Constant Testing  Deflection Testi ( read more ).....Closed
08-2505 Westcoast USA A2LA Analytical Oil Testing Laboratory needed for testing grease to confirm the physical and chemical properties. ( read more ).....Closed
08-2499 India ISO, EP/BP, USP Physical Laboratory needed for the following testing: (1) Osmolarity of ophthalmic viscoelastic device (OVD), (2) Elasticity (OVD) and (3) Chondrointin Sulfate (Assay). ( read more ).....Closed
08-2490 Eastern USA Physical Laboratory needed for beverage emulsion oil droplet size and distribution - Use most appropriate method - e.g. static light scattering . ( read more ).....Closed
08-2472 USA ISO, A2LA, AMS Physical Laboratory needed for AMS-T-81914 testing. ( read more ).....Closed
08-2432 Mexico City NES D5806(NISSAN) Physical Laboratory needed for the following: -6.20 Low temp. Sealing property -6.21 Pressure resistance under heat aging property -Preparation of burst T-tcurve -Preparation of leakage T-tcurve "IN HOSES" ( read more ).....Closed
08-2377 India Physical Testing Laboratory needed for Materials Screeds Testing: Compressive strength, Residual Humidity, Waterproofing: Elasticity, Adhesion to substrate Adhesives: Shear Strength, Tensile Strength, Adhesion / bond & compatibility with above mentioned stones Grouts: Compressive strength, Resistance to abrasion, Water absorption, De-colorization, Stain Sealents: De-colorization, Stain tests, Shore hardness, elasticity, ultimate elongation ( read more ).....Closed
08-2359 USA FDA Product Testing Laboratory needed for physical and sensorial quality report in peanuts. ( read more ).....Closed
08-2236 FDA GMP physical laboratory needed for testing disposable laparoscopic scissor tips (medical device). ( read more ).....Closed
08-2121 ISO physical laboratory needed to perform ISO 15001 compatibility testing on a heated wire respiratory tubing and pure oxygen conveyed by the tubing ( read more ).....Closed
08-2104 Microbiology Laboratory needed for High Level Disinfectant Testing: Composition - Identity and Concentration Impurities Physical properties (color, odor, and clarity) pH Stability studies Efficacy Tests Biocompatibility Device and Material Compatibility ( read more ).....Closed
08-2077 USA Metallurgical Laboratory needed for Physical and Chemical Analysis performed on some small door hinge pin bushings. ( read more ).....Closed
08-2031 India Physical Engineering Laboratory needed for performance testing in supersonic wind tunnel and nozzle performance test unit... ( read more ).....Closed
08-2015 India physical laboratory needed for testing Acrylic tranparency. ( read more ).....Closed
08-1985 Southwest USA Physical Laboratory needed for Drop Weight Tear Testing: Initially 15 test samples (quote per piece) DWTT Testing X-70 Material Sample Size: 3" W x 12" L 3/8"-5/8" Thick ( read more ).....Closed
08-1970 USA Physical Laboratory needed for flammability testing, IEC 60076-11 page 57, section 28 Fire Behaviour Test (special test). We need to have a 350 kVa dry Type Transformer (open core and coil) tested per these requirements. ( read more ).....Closed
08-1882 South Korea Hydrology Laboratory needed to do a physical visit to a steel mill and confirm that the mill is equipped to handle Hydro Test, Eddy Current Test and Ultra Sonic Test on pipe ( read more ).....Closed
08-1826 USA Physical Laboratory needed for Test 2 headphones to the FAA flammability specification FAA test per Title 14, Part 25 ( read more ).....Closed
08-1809 A2LA East Coast Physical, Materials Laboratory needed Flammability testing per FMVSS302. A2LA accredited lab, chemical and mechanical scope. ( read more ).....Closed
08-1786 Midwest/East Coast USA Physical Laboratory needed for ASTM Testing for Pendulum impact per ASTM-C-368, ceramic plate / chip resistance ( read more ).....Closed
08-1783 Physical laboratory needed for testing and material selection of airplane seat in economy class for airline in China. ( read more ).....Closed
08-1730 Optical Laboratory needed for ASTM Testing for Optical Deviation to ASTM F801-96, Optical Distortion to ASTM F2156 ( read more ).....Closed
08-1676 USA Physical Laboratory needed for NFPA Flammability Testing of Fire resistant garments to be certified against the NFPA 2112 standard ( read more ).....Closed
08-1590 Georgia Physical Laboratory needed for testing 2 - 4 samples of hardwood flooring on the Janka scale for relative hardness (to one another) as well as compared to industry standards ( read more ).....Closed
08-1543 Los Angeles physical laboratory needed for physical testing of a portable home traction unit to show the least amount of pounds of pull it can provide. ( read more ).....Closed
08-1533 Large Consumer Products Manufacturer needs China materials laboratory needed for Testing on paper products: a) absorbency testing (especially if they can handle animal blood), b) physical testing (under high speed, controlled humidity and temperature), c) fiber identification (cotton, rayon, polyethylene, etc). ( read more ).....Closed
08-1529 ISO Physical Laboratory needed for testing based on ISO 594-1 and 594-2 requirements: Gauging, Leakage, Separation force, Unscrewing torque, Ease of assembly, Resistance to overiiding, Stress cracking. ( read more ).....Closed
08-1505 ISO, GLP, GMP Europe or Israel Physical Laboratory needed for determination of Z- potential of PS microparticles (Malvern) 2. Determination of size distribution of PS microparticles (Malvern) in water based suspension. 3. Determination of number of particles (particle counter) ( read more ).....Closed
08-1500 West Coast USA Physical Lab needed for CAN/ULC S102.2 flammability testing of PETG based product tested for the CAN/ULC S102.2 surface burning characteristics of building materials and assemblies for thermoplastic materials. Minimum would be 6mm thick, max is 25mm thick ( read more ).....Closed
08-1493 India materials laboratory needed for physical testing tear strength of polyester lamianted film and pouches. ( read more ).....Closed
08-1488 A2LA or ISO 17025 weatherability Laboratory needed for Water Resistance - Rain Test Method AATCC 35-2006 and Hydrostatic Head ISO 811-1981 or AATCC 127 option 2 (Textest) ( read more ).....Closed
08-1484 USA physical weathering laboratory needed for GR 1089 testing lightning effects on telecommunications equipment ( read more ).....Closed
08-1469 US Physical Laboratory needed for Flammability testing for a neck support pillow. ( read more ).....Closed
08-1468 Europe EPA GLP materials laboratory needed for Flammability testing to 830.6315 ( read more ).....Closed
08-1445 USA Physical Laboratory needed for WSP 10.3 Standard Test Method for Nonwovens Demand Absorbency ( read more ).....Closed
08-1442 Canada Physical Laboratory needed for GMW3232 Flammability Testing ( read more ).....Closed
08-1418 USA ISO 9001, PHYSICAL LABORATORY NEEDED TO TEST PHYSICAL DIMENSIONS OF SCREWS AND BOLTS PER OUR ISO 9001/AS9120 REQUIREMENTS ( read more ).....Closed
08-1417 GMP, GLP Canada, Physical Laboratory needed for Particle size determination by laser light scattering, dry dispersion ( read more ).....Closed
08-1397 Large Automotive Manufacturer needs USA Materials Laboratory to verify chemistry & physical properties to specification provided. Material used in investment casting industry to make ceramic shell for patterns. ( read more ).....Closed
08-1378 West Coast, USA Physical Laboratory needed for testing two 14mm combination wrenches we would like tested to determine the materials Ultimate and Yield Tensile Strength. One wrench is Crome Vanadium and one is Ti 6AL-V4 ELI. ( read more ).....Closed
08-1368 Geophysical Laboratory needed for Masonry and Concrete Masonry Unit Testing Masonry Brick: ASTM C67 tests (compressive strength, absorption, freeze-thaw, and length change) Concrete Masonry Units: compressive strength (ASTM C140), linear drying shrinkage (ASTM C426), and freeze-thaw (ASTM C1262) ( read more ).....Closed
08-1364 USA Physical Laboratory needed for ASTM Testing, Brittleness Temperature (ASTM D1790) of Plastic Sheeting by Impact - Want to get independent lab results of PVC samples at 20 degrees F. Our in-house testing shows all failures and our plastic supplies testing shows passing. ( read more ).....Closed
08-1362 Eastern USA Physical Laboratory needed for EPA 3-day Evaporative test for vapor recovery; and OBD2 test to California standards ( read more ).....Closed
08-1360 India Physical and Microbiology Laboratory needed for fungus resistance and water proofness testing on an electronic module, a Passenger Service adapter used in the helicopter/passenger aircraft . ( read more ).....Closed
08-1353 USA ISO 9000 Physical Laboratory needed for Testing Total Absorbent Capacity to ISO Test Method 11948-1:1996 2. Rate of Acquisition Test (ROA): Acquisition Rate and Rewet Test. Protocol for this test can be found on the Medical Supply Provider Home Page on the DHS website. 3. Rewet Test: Multi-State Acquisition Rate and Rewet Test. Protocol for this test can be found on the Medical Supply Provider Home Page on the DHS website. ( read more ).....Closed
08-1340 Minneapolis, St. Paul Physical Laboratory needed for ASTM Adhesion testing (ASTM D-1000, D-3330/3330M) ( read more ).....Closed
08-1315 Central USA Physical Laboratory needed to aide in designing and testing an enclosure to UL 1203 ( read more ).....Closed
08-1306 Analytical Chemistry Laboratory needed for method development of an alternate method to AOAC method to detect Lactose in Milk. The method requires a simple protein precipitation, dilution and analysis on a regular HPLC system with our CAD (Charged Aerosol Detector). This method requires less preparation than the AOAC method, unspecialized analytical equipment, and we would be interested in obtaining comparative results between the two methods. The Charged Aerosol Detector is a nebulizer-based de ( read more ).....Closed
08-1286 Physical Laboratory needed for flammabilty testing of socks made of moda acrylic inherently flame resistant ( read more ).....Closed
08-1285 USA Physical Laboratory needed for Cleanliness testing to ISO 16232 ( read more ).....Closed
08-1261 Medical devices Manufacturere needs ASTM physical strength testing of interference screws and anchors according ASTM STD . ( read more ).....Closed
08-1193 USA Analytical Chemistry Laboratory needed for testing to develop Specification Sheet Report for Borax. Must describe the contents of our product in detail. Below is an example of our needs: B2O3: 48.5-49min,Na2B407.5HzO: 99.9% Na2O: 21.28min SO4: 70ppm max Cl: 50ppm max Fe: 10ppm max Chemical Properties (Typical) Purity:99.90% min B2O3:47.76% min Physical Properties Crystalline Molecular Weight:291,35 Specific Gravity:1,815 gr/cm3 Bulk Density:0,980 gr/cm3 F ( read more ).....Closed
08-1161 Europe Physical Laboratory needed for testing Carbon Black and few more products for, power stretching, cleanliness level, overall weight and ext, but on the basic level we need a raw material analysis, which will good for Carbon Black buyers in europe, (basic rubber and big tires producers will use it as a filler) We already did it in few laboratories in israel and entered the materiel into production lines and successfully capable to produce rubber products, (gas pips and many more rubber ( read more ).....Closed
08-1155 EPA USA Environmental, Mechanical Laboratory needed for EPA, DOT certification testing: gassious emmissions; physical examination of vehicle for compliance ( read more ).....Closed
08-1154 Textiles Laboratory needed for M1 Fire Retardant Testing ( read more ).....Closed
08-1120 Asia, Malaysia Physical Lab needed to test a cable harness made of plastic to determine the physical and thermal properties of the cable harness. ( read more ).....Closed
08-1074 Mechanical Laboratory needed in Europe for MIL-STD Vibration & Shock Testing to MIL-STD-167 and MIL-S-901D ( read more ).....Closed
08-1059 Physical Laboratory needed for ASTM safety testing a product for ASTM1951 and ASTM1292 for safety surfacing - critical fall height ( read more ).....Closed
08-1024 Canada Physical Engineering Laboratory needed for examination of some rebars that are left in site for 1.5 years corroded , we need Min 4 samples should be tested: 1.Measure cross section area, perimeter , weight per meter of bars 2. Tensile test to determine yielding and fuilure stresses of bars ( read more ).....Closed
08-1003 FDA GMP / GLP Biophysical Laboratory needed for creep testing on tubular device at 3 psi load ( read more ).....Closed
08-0996 UK Geophysical laboratory needed for Cerchar Scratch Testing on Rock ( read more ).....Closed
08-0910 ASTM F1148 USA materials lab needed for ASTM compliance testing ( read more ).....Closed
08-0876 FDA GMP certified Europe analytical chemistry lab needed to test for - Density and spesific gravity - Dealectric constant - Thermal conductivity - Heat capacity - DSC - Acustic wave fade - Disossiation constant ( read more ).....Closed
08-0858 ASTM certified USA lab needed to test my product. Is 13'x7'x4", is a HDPE composite, and comes in 2 versions-one mechamnically assembled, one hot plate welded; I need to know bending strength, torsion, life expectancy, one version of product compared to the other, wheel bearing capacity, etc. I need to know these and things about my product I haven't stated here regarding likely failure modes, benefits of product, etc. ( read more ).....Closed
08-0847 Midwest US Packaging Lab needed for - Physical & Environmental impactm Storage Stability Testing Duration 6 months ( read more ).....Closed
08-0845 USA (Mid West) lab needed for a Storage Stability Test. Need to store a 3 pallet high stack of product at room temperature (72°F/50%RH) and at 104°F.There will be 3 variables. Total of 9 pallets making 3 stacks rough stack height of 135 ( read more ).....Closed
08-0825 Pakistan lab with a H.S. gas installer needed for laboratory test of a 3-whealer CNG kit. Kindly let us know about the requirements or procedure of 3-whealer CNG Kit Laboratory test. ( read more ).....Closed
08-0821 North America (prefered) with ASTM etc applicable standards certifications lab need to have (WVTR) Water Vapor Transmission Rate and Oxygen Barrier testing done on a coated paper product. ( read more ).....Closed
08-0762 Delaware lab needed to test soil compaction testing at a construction site in Newark, Delaware. The soil must be capable of sustaining a loading of 2000 psi. Concrete is being poured at the site. Concrete core tests are also needed for a slab & walls of poured concrete. Please contact me ASAP with cost & turn-around time. Please contact me ASAP by telephone ( read more ).....Closed
08-0753 Europe lab with FDA,and EU requirments standards to test spring bottling water in microbiology, physical and chemical analysis ( read more ).....Closed
08-0738 Europe physical lab needed for din 8078 & DVGW Testing of Pipes for: 1- HNTERNAL PIPE PRESSURE 2- HYGINE TEST 3- HEAT REVERSION 4- MELT FLOW RATE 5- DIMENTION OF PIPE 6- IMPACT TEST All of test according to din 8078 &DVGW and we want to be registeried at DVGW ( read more ).....Closed
08-0735 Asia physical lab needed for testing of tin,melamine,LDPE,PP to XX-6649-US,TRGT-8001-US,TRGT-06013-US,XX-6548-US,TRGT-6609-US ( read more ).....Closed
08-0731 US or Canada physical lab needed for testing of varnishes and ink for durability and shelf-life. Also require a lab for outsourcing the mixing and creation of inks and varnishes. ( read more ).....Closed
08-0729 Chicago physical lab with UL 94 testing capabilities needed for flammability testing ( read more ).....Closed
08-0724 USA lab with physical capabilities needed for quotes on each of the following tests: abrasion resistance per EST-329A, Heat aging in a convection oven at 275C for 100 hours, flame resistance per EST-439, fluid exposure per EST-911, dielectric strength per UL 1441, flame per ASTM D 350, low temperature flexibility, MIL-I-3190F, UL VW-1 vertical wire flammability, wall thickness, weight, SAE ARP 1536A abrasion testing. ( read more ).....Closed
08-0719 USA physical lab needed for with UV Testing capabilities ( read more ).....Closed
08-0712 Physical Lab needed to perform Outgassing Test according to ASTM E595 ( read more ).....Closed
08-0705 American (preferably Virginia)physical lab to test surface tension using Du Nouy Ring tensiometer ( read more ).....Closed
08-0703 US physical lab needed for determination of the dielectric constant of Rubinate 1820. ( read more ).....Closed
08-0702 Non-GLP physical lab needed for ASTM Performance Testing of Dilutable Neutral and Alkaline Disinfectant Cleaners. Would like relative measurement of Cleaning Performance ( read more ).....Closed
08-0691 ANSI 156.11 Cycle Testing and Physical testing of showcase and cabinet locks per the A156.11 spec - looking to have our locks conform to minimum grade 2, but grade 1 preferred ( read more ).....Closed
08-0679 US Physical Lab needed to perform Heat of Combustion Test on 7 samples. ( read more ).....Closed
08-0662 Europe Physical lab needed for Chemical Resistance Testing ( read more ).....Closed
08-0657 USA Food Analytical Chemistry Laboratory needed for testing the quality parameters for a carmalized food product by looking at HPLC/GC profiles. The original source being carbohydrate with some trace cyanic glucosides. The physical constituency of the product is that of a thickened viscous black liquid. The GC analysis requred would be that of a 'Head Space' Analysis. Quotation on GC/MS and liquid chromatography-mass spectrometry (electrospray/nanospray) etc. ma be considered but not essential ( read more ).....Closed
08-0632 ISO Asia microbiology and biomedical laboratory needed for all USP microbiological and physical testing on Medical Devices, Bone wax ( read more ).....Closed
08-0602 ISO 9000/ASTM US Analytical Chemistry Lab to conduct Analytical or Physical mechanical tests on lubricity and slip of topical creams ( read more ).....Closed
08-0588 Biomedical/Biophysical Lab needed in EUrope for ASTM Testing (ASTM 1717) for Cervical Spinal Implant System ( read more ).....Closed
08-0584 Physical Acoustic Lab needed for a battery charger vibration test ( read more ).....Closed
08-0551 Mechanical /Physical Lab needed for ANSI Product Safety Testing to CE Standards of dynamic and static strength of Full body Harness and other fall arrest systems and sub componenets as per EN and ANSI standards ( read more ).....Closed
08-0547 Analytical Chemistry Laboratory needed for BP characterization testing of metered-dose inhaler (physical aspect, Uniformity of delivered dose, Deposition of emitted dose, Particulate size,Particulate size) in reference to BP2000. ( read more ).....Closed
08-0538 Physical Laboratory needed for maximum load testing for steel, plastic, aluminum wall systems and components for home storage ( read more ).....Closed
08-0500 Analytical Chemistry Laboratory needed for Chemical analysis and thermal analysis: - Nitrate content; - Chloride content; - Nitrite content; - Carbonate content; - Sulphate content; - Hydroxyl content; - Perchlorate content; - Magnesium content; - Calcium content. Thermal and physical analysis: - Thermal Stability; - Melting point; - Freezing point; - Flash point; - Fire point; - Autoignition point; - Latent heat; - Heat capacity (at the temperature range 260-550°C); - Therm ( read more ).....Closed
08-0495 Mechanical laboratory needed for cmvss testing ( read more ).....Closed
08-0491 Mechanical Laboratory needed for ASTM compressive strength testing of concrete cylinder or block. ( read more ).....Closed
08-0473 Metallurgical lab needed to test the grade and strength of a steel sample ( read more ).....Closed
08-0468 FDA Physical lab needed for ASTM testing for flexible packaging particularly hot tack, static charge decay, any chemical testing for inks, ATR, WVTR ( read more ).....Closed
08-0406 Physical Environmental laboratory needed for testing imported several models of 3 wheel cars from China and will need the NHTSA clearances along with CARB and EPA. I have an environmental lab I can work with if that service is not available through your company. I am prepared to bring in the units for testing but need to better understand the requirements and how to assess the different models and their testing. ( read more ).....Closed
08-0365 Biophysical laboratory capable of performing aging studies and tensile tests on woven collagen dressings needed. We are performing aging tests on samples of the dressings medical devices, and we wish to determine how long term elevated storage temperatures effect the elasticity and tensile strength of the matrices over time. The samples are 1/8in x 2in x 3in. We are interested in contacting with you to perform 18 stress/strain measurements, providing a stress/strain curve for each sample and ( read more ).....Closed
08-0333 Manufacturer of masonary stone products needs physical lab ASTM tests for thermal resistance, compressive strength, flame spread, etc.. ( read more ).....Closed
08-0331 Physical weather lab needed for Testing composite deck board per NRC-IRC for Xenon Arc UV degradation NRC-IRC, ASTM G 155, ASTM D2565. ( read more ).....Closed
08-0325 Product Safety Lab needed for Flash point testing ( read more ).....Closed
08-0323 Physical wethering lab needed for ASTM Salt Spray Corrosion Testing. 500-hour environmental salt spray testing for various small parts used in ceiling fans in accordance to ASTM B117. ( read more ).....Closed
08-0255 Biophysical laboratory needed to test latex free band aids ( read more ).....Closed
08-0216 Physical laboratory needed to test knee implants to ASTM F 1223. We are a Brazilian company that produces knee implants. We are needing to quote these services first to check if the costs are avaiable for us. They are made of stainless steel ASTM f138 and Polyethylene UH MW saurgical grade. The tests should be done according to the ASTM F 1223 - Standard Test Method for Determination of Knee Replacement Constraint and ISO 14243 - Implants for surgery - wear of total knee joint prostheses; part1 ( read more ).....Closed
08-0204 Mechanical Laboratory needed to test Fire brake to reach NFPA 701 ( read more ).....Closed
08-0203 Physical laboratory needed for testing tempered glass. We will be installing a glass tempering furnace in April, 2008. We would like to make contact with a testing lab for the purpose of licensing our tempered safety glass ( read more ).....Closed
08-0190 Physical laboratory needed to test force required to open flip top cap on filled bottles of product and flip top caps on empty bottles. ( read more ).....Closed
08-0186 Physical laboratory needed for testing of a female Luer attachment per ISO 594/1 (Section 4) and ISO 594/2 (Section 4) ( read more ).....Closed
08-0178 Physical laboratory needed for samples of 3" minus for a direct shear test to determine the internal angle of friction. ( read more ).....Closed
08-0158 Geological Physical laboratory needed for Drilling Mud permeability testing at Hight Temp (130 deg C) and High Prerssure (200 PSI) ( read more ).....Closed
08-0149 Physical laboratory needed for security film on glass - glazing product safety test. Please see the link below for details: www.protectiveglazing.org/resources/GSA%20TEST%20Method.pdf ( read more ).....Closed
08-0130 Physical Analytical Chemistry laboratory needed to evaluate the amount of x-ray radiation leakage from a transmission electron microscope ( read more ).....Closed
08-0128 Physical Analytical Chemistry laboratory needed for tests for leakage of infusion sets and the injection sites ( read more ).....Closed
08-0123 Physical laboratory needed for ECG electrode adhesive testing (skin contact) ( read more ).....Closed
08-0092 Physical laboratory needed to test super fine flour for cosmetic use, 80% go through the 400 mesh seive. An alpine Air Jet Sieve is an idea instrument for this type of testing ( read more ).....Closed
08-0090 Physical laboratory needed to do triaxial test for sintered ceramic materials Confining pressure 400MPa Loading axis until failure (around 2GPa) Iratxe Mijangos Department of Mechanical and Manufacturing Engineering Trinity College Dublin Ireland ( read more ).....Closed
08-0050 Bioanalytical Analytical Chemistry laboratory needed for the following testing: Acute oral Toxicity Acute Dermal Toxicity Primary Eye Irritation Primary Skin Irritation Guinea Pig Sensitization (Buehler) Acute Inhalation Toxicity Storage Stability w/ Corrosion Color & Odor Physical State Oxidation / Reduction Density pH ( read more ).....Closed
08-0042 Physical laboratory needed to mill beads and milled with a spex freezer mill model 6870 or 6850 ( read more ).....Closed
08-0030 Physical Product Safety laboratory needed for MRI Safety testing in accordance with ASTM F2052 on small hand held devices up to 3.0 tesla. ( read more ).....Closed
08-0027 Physical Vibrational laboratory needed for random vibration and drop test on palletized assemblies - packaging. ( read more ).....Closed
08-0022 Physical laboratory needed to test cooking grates as found on barbecue grills to EU standards. The main standard is Directive 1935/2004/EC. Materials are intended to come into contact with food. ( read more ).....Closed
08-0019 Analytical Chemistry laboratory needed for the following testing: Karl Fischer Modulated DSC and other physical testing ( read more ).....Closed
08-0016 Physical laboratory needed for structural slab load testing at kolabas - lab safe carrying load ( read more ).....Closed
08-0013 ISO Geological Physical laboratory needed for stone polishing value test for the aggregates ( read more ).....Closed
07-2570 Physical laboratory needed for ASTM F 2077 Test Methods for Intervertebral Body Fusion Devices, F543 Standard Specification and Test Methods for Metallic Medical Bone Screws, F1717 Standard Test Method for Spinal Implant Constructs in a Vertebrectomy Model. The Brazilian regulatory registration process has recently changed and they are requesting some tests that currently not done in the country. How long would it take to do them and what will be your most competitive prices to do them? ( read more ).....Closed
07-2569 Geological Physical laboratory needed for Grain Size Analysis (ASTM D422-63) down to 2 micron. Hardness Analysis-specifically ranked against Zirconia, Silicon Carbide and Tungsten carbide Grain shape - rounded vs. angular ( read more ).....Closed
07-2568 Physical laboratory needed for rubber testing - scorch test and mooney viscosity test ( read more ).....Closed
07-2530 Physical laboratory needed for testing Concentrating Solar Sun Tracker. ( read more ).....Closed
07-2499 Physical laboratory needed for reliability testing - Cycle/static/abuse testing of aircraft seats. ( read more ).....Closed
07-2489 Biomedical Analytical Chemistry laboratory needed by being given a proprietary API, develop a dry powder inhaler product. It will be necessary to develop the appropriate physical form of the API and provide it in a device. Clinical testing volumes will be needed. ( read more ).....Closed
07-2463 Physical laboratory needed for MVTR testing or WVTR testing. We are a manufacturing company of Carrier tapes and lock reels. As such, we are a semi-con industry that is in line with packaging solutions. The laboratory will be submitting the result or report upon sampling has been done. ( read more ).....Closed
07-2454 Physical laboratory needed for packaging test - mechanical handling, stacked vibration, low pressure, vehicle vibration, warehouse stacking ( read more ).....Closed
07-2437 Physical laboratory needed for testing powder coating for adhesion, film thickness, impact/chip resistance ( read more ).....Closed
07-2427 Physical laboratory needed to test our product so that it meets ANSI standards ( read more ).....Closed
07-2423 Physical laboratory needed to test our Polypropylene according to ASTM D-2565-99, ASTM D 573, ASTM D 3012-04. ( read more ).....Closed
07-2406 Physical laboratory needed for pressure testing a sediment removal pipe sock filter. Sock is made from recycled textile connects to 2 inch hose with standard quick release hose clamp. Sock is 5 feet long and about 6 in diameter. Would like to know at what water pressure sock would burst. We know it is Greater than 150 PSI ( read more ).....Closed
07-2403 Physical laboratory needed to test strength of cloth; ball bursting method ( read more ).....Closed
07-2378 FDA GLP Physical laboratory needed to do all pre IDE testing for spinal device for the FDA ( read more ).....Closed
07-2377 Physical food laboratory needed to test the firmness of cooked beans ( read more ).....Closed
07-2375 ISO Physical Analytical chemistry laboratory in USA needed for ASTM optical quality testing of injection molded plastic lens - Luminous Transmittance Percentage, Haze Percentage, Flatness ( read more ).....Closed
07-2373 Biophysical laboratory needed for ASTM testing of stent pulsatile fatigue according to ASTM F 4277-07 ( read more ).....Closed
07-2372 FDA GMP Physical laboratory needed for testing stainless steel medical bandage scissors imported for FDA approval ( read more ).....Closed
07-2363 Physical laboratory needed in USA for ANSI testing of new safety glasses lenses to verify they meet the ANSI Z87.1 standards. ( read more ).....Closed
07-2345 Physical laboratory needed for compressive resistance testing carried out on EPS rigid foam board ( read more ).....Closed
07-2331 Physical laboratory needed flammability testing of bed linen for Canada and U.S. requirements. ( read more ).....Closed
07-2330 Physical laboratory needed for impact test for a wired glass specimen ( read more ).....Closed
07-2310 Physical laboratory needed for biocompatability testing of devices - Iso 10993-5, ISO 10993-10 ( read more ).....Closed
07-2262 Biophysical laboratory needed for testing to ISO 7886 ( read more ).....Closed
07-2232 Physical laboratory needed to do crush testing on various size Core Tubes used in our Boxboard Manufacturing Process. ( read more ).....Closed
07-2211 Physical laboratory needed to test the increased abdominal muscle contraction using our abdominal device vs. doing a standard sit-up. This may be accomplished by performing sit-us/crunches with the AB Maximizer utilizing EMG. ( read more ).....Closed
07-2206 Product safety laboratory needed to perform testing in accordance with all ASHRAE Standards 34-2007 for refrigerant classification for a US company that produces a hydrocarbon blend refrigerant ( read more ).....Closed
07-2187 Physical laboratory needed to test the following: 1)oven aging stability of polypropylene samples. 2)Wether-O-meter stability of polypropylene samples. ( read more ).....Closed
07-2146 Physical laboratory needed to determine the hardness and/or abrasive nature of sand sized particulate material suspect that a Tabler multi-media abraser might be the instrument of choice ( read more ).....Closed
07-2135 Physical laboratory needed for support in doing ISO test for intraocular silicon devices ( read more ).....Closed
07-2130 Physical laboratories (1-2) needed to test our RFID chips. These 2.45 GHz chips are only .4mm square are impervious to gamma ray sterilization. Hitachi will provide the RFID readers and chips at no charge. ( read more ).....Closed
07-2110 Packaging lab needed for conducting Environmental Chamber Studies. Three studies ranging from 1 to 6 months. Approximately 2 skids worth of packaging products. A 10'x 10' walk-in chamber would be ideal, but not mandatory. Please, call for further details. ( read more ).....Closed
07-2089 Analytical Chemistry and Physical Laboratory needed to test ACID/ alkaline evaluation of fabric materials to determine if corrosion to aircraft aluminum is likely and quantity/ type of flame retardent may also be needed. ( read more ).....Closed
07-2072 Physicals lab needed to test activated alumina balls AD-101 for drying of instrument air. ( read more ).....Closed
07-2068 Toxiology lab needed for testing LD50, physical properties, reactivity data, other data as required for MSDS preparation. THe materials are fuel based product/byproduct. ( read more ).....Closed
07-2055 Physical laboratory needed for non-destructive testing for Age verification for: 1) Wood, 2) Ceramics ( read more ).....Closed
07-2047 Geophysical laboratory needed for UCS-local Strain, X-Ray Diffraction, Scanning Electron Microscope, Mercury intrusion porosity testing for rock sample(calcisiltite) ( read more ).....Closed
07-2016 Physical lab needed for absorption testing ( read more ).....Closed
07-2005 Physical laboratory needed for ASTM Testing (ASTM C177)for thermal conductivity of PET foam ( read more ).....Closed
07-1963 Physical laboratory needed for ASTM Optical fiber testing in Temperature Humidity Cycling chamber in which tamperature varies from -10 to +85 degree celcius & Relative Humidity i.e. RH varies from 0% to 95% ( read more ).....Closed
07-1938 FDA Biophysical laboratory needed for ISO tensile strength testing of tissue (tendons ( read more ).....Closed
07-1936 Physical laboratory URGENTLY needed for ASTM testing the following materials: 3no. 350mm x 450mm x 69mm 3no. 200mm x 300mm x 52mm 3no. 200mm x 400mm x 63mm Tests required are: The tests are indicated in table 18.4.5.1 of Division II of AASHTO 1. Durometer Hardness as per ASTM D 2240 2. Tensile Strength as per ASTM D 412 3. Ultimate Elongation as per ASTM D 412 4. Heat Resistance as per ASTM D 573 5. Compression Set as per ASTM ( read more ).....Closed
07-1926 Physical laboratory needed for testing to verify if part is 316 ( read more ).....Closed
07-1915 Materials laboratory needed for testing samples (2" diameter buttons) of company-made elastomers to pressures up to 10 KSI in fluids (oil, salt water) at temps up to 180 C for 1 - 2 weeks. We want to evaluate the swelling rates of these elastomers at these conditions. Evaluation to include physical dimension measurements and submersion-type volume determination. ( read more ).....Closed
07-1907 Physical laboratory needed for thermal testing for heats of vaporization (liquid to gas)measurements ( read more ).....Closed
07-1905 Physical laboratory needed for ASTM testing of rubber tiles. Kindly provide an official quotation of testing charges to us. 1. Abrasion Testing ASTM F1292 2. Coefficient of Friction ASTM D 3389 3. Elongation At Break ASTM D412, DIE C 4. Tensile Strength ASTM D412, DIE C 5. Coefficient of Thermal Expansion 6. Flammability ASTM D2859 (Burning Pill Test) 7. Shore A Hardness ASTM D2240 8. Tear Strength ASTM D624, DIE C 9. Water Permeability 10. Weatherization Test ASTM C67&D573 11. C ( read more ).....Closed
07-1889 Clinical laboratory needed for testing biophysical indicators before and after exposure to product sample by counting the lymphocytes in the presence of bacteria /viruses. Overall, our goal is to demonstrate that product is improving biophysical conditions and to show that it improves the immune system.Please contact us to discuss the details. ( read more ).....Closed
07-1888 Packaging laboratory needed for Tappi Physical testing for corrugated boxes, ECT test, Mullen test, Basis Weight ( read more ).....Closed
07-1879 Physical laboratory needed for testing transparent armor (ballistic glass) for light transmission in the 400-1100 nm range in 10 nm increments. ( read more ).....Closed
07-1876 Physical laboratory needed for testing for internal product leagkae from suspected air frieght transportation problem Testing to include cutting open devices and inspect for internal product leakage. Product suspected air freight transportation problem. ( read more ).....Closed
07-1854 Physical Laboratory needed for ASTM tensile testing (ASTM D882, ASTM 638, ASTM D3826) on plastic polymer consisting of a mix of PE and EVA using ASTM standards. ( read more ).....Closed
07-1850 Mechanical laboratory needed for testing variety of hollow shafts for torsion and angle of twist, different materials, with OD up to 6 inches and length up to 120 inches, torque about 2500 ft lbf. ( read more ).....Closed
07-1819 Materials engineering testing laboratory required to provide fastener engineering test for torque angle failure. Results are to be recorded using a torque transducer and transient recording analyzer. ( read more ).....Closed
07-1754 Product Safety Laboratory needed for CE Testing for compliance of CE/ETAG 0012 for log home building kits ( read more ).....Closed
07-1753 Physical Laboratory needed for ASTM Testing (ASTM C 110, Section 16), Dry Brightness test on Limestone ( read more ).....Closed
07-1745 Materials laboratory needed for rheology testing "index of adhesion" or cohesion or stickiness of red mud (clay) as a function of polymer dosage, solid concentration and composition of red mud (chemical and physical). Material contains caustic solution. ( read more ).....Closed
07-1740 Physical laboratory needed for testing Eddy Current In accordance with E243 ( read more ).....Closed
07-1736 Materials Laboratory needed for certification testing of medical gloves as per En-388 physical standard. Our test material is Latex and Nitrile coated gloves. ( read more ).....Closed
07-1731 Physical Laboratory needed for ASTM Testing D3575 suffix BB and ASTM D1596 dynamic cushioning for polyolefin foam samples ( read more ).....Closed
07-1727 UKAS Physical Laboratory needed for En-388 testing to include abrasion,cut blade cut test,tear test and puncture testing in Asia ( read more ).....Closed
07-1682 Physical Laboratory needed for Tensile Testing to FTMS 191-A 5100 ( read more ).....Closed
07-1663 PHYSICAL LABORATORY NEEDED FOR DIN 4102 FIRE BEHAVIOR TESTING OF BUILDING MATERIALS, PP DRANGE PIPE ( read more ).....Closed
07-1656 Physical Laboratory needed for CPSC Flammability Testing (CPSC FF1-70) of a fire resistant chiminea pad to verify if it meets CPSC FF1-70 requirements. Australian Standard as conducted by NATA. ( read more ).....Closed
07-1626 Analytical Chemistry Laboratory needed for pharmaceutical HPLC testing, GC testing, Dissolution Testing, Titration, Physical testing ( read more ).....Closed
07-1618 Materials laboratory needed for Hardness testing of Case hardened screws ( read more ).....Closed
07-1614 Physical Laboratory needed for ASTM Testing (ASTM F640-79) for Radiopacity of tubing using x-ray comparative evaluation. ( read more ).....Closed
07-1581 Analytical Chemistry Laboratory needed for freeze drying amine oxide product for physical chemistry testing ( read more ).....Closed
07-1563 Physical laboratory needed for NORSOK Shell Standard Explosive decompression testing on highly saturated nitrile o-rings. Testing done to the NORSOK or shell standards. ( read more ).....Closed
07-1544 Physical Laboratory needed for environmental stress crack resistance testing, via stack testing, for 1L PE bottles, approximate loadings 14-25Kg, 180 bottles (possibly 60 at a time), filling of bottles with stress crack solution and weigh, sealing caps onto bottles (caps not perfect fit, require gluing/melt seal) for gas tight seal, put on stack test rig at 40oC, Monitor twice daily to failure (likely 60 days- not certain) ( read more ).....Closed
07-1535 Physical laboratory needed for gamma or x-ray field testing to determine if their is damage to a new High Voltage cable. ( read more ).....Closed
07-1533 Physical laboratory needed for flame retardency testing for textiles on clothing. ( read more ).....Closed
07-1531 Physical laboratory needed for impact testing to Aust Std AS/NZS 2924.1:1998 Clause 4.4.2 [Resistance to impact by small diameter ball] ( read more ).....Closed
07-1529 Biophysical laboratory needed for ISO Testing: ISO 5361:1999 testing for endotracheal tubes & ISO 5367:2000 for laryngeal masks. Need physical testing for Japanese market. ( read more ).....Closed
07-1523 Physical Laboratory needed for California Bearing Ratio (CBR) Testing ( read more ).....Closed
07-1512 Physical laboratory needed for ASTM testing tensile strength and stress relaxation properties of various nitrile butadiene rubber products. ( read more ).....Closed
07-1506 Physical laboratory needed for ISO/ASTM Microtomy of high density polyethylene samples (max 90mm x 50mm). Section thickness of 5 microns. ( read more ).....Closed
07-1478 Physical laboratory needed for Drop/Vibration/Shock testing on Desktop PC Chassis Unit with the Modem Card. ( read more ).....Closed
07-1343 Physical laboratory surveyer needed for ASTM cargo inspection ( read more ).....Closed
07-1274 Physical laboratory needed for Compressive strength testing of Dental cements ( read more ).....Closed
07-1241 Physical laboratory needed for testing closures to determine if they are within specifications. ( read more ).....Closed
07-1176 Physical laboratory needed for UV radiation testing of the Phototherapy unit use 6 nos CFL lamps. Would like to carryout UV testing of the light output for a wave length of 180-400nm ( read more ).....Closed
07-1157 Biomedical laboratory needed for ISO 8536-4 Intravenous Set Testing, Section 6, Physical requirements and Annex A testing required. ( read more ).....Closed
07-1111 Physical laboratory needed liquid strike through testing by PE film perforated -plastics ( read more ).....Closed
07-1102 Materials laboratory needed for rockwell hardness testing to R 15N 76.5 - 79.5 ( read more ).....Closed
07-1082 Physical laboratory needed for ASTM Testing for shock and thermal explodability ( read more ).....Closed
07-1053 Physical laboratory needed that specializes in testing and dating paper documents and works of fine art. ( read more ).....Closed
07-0999 Analytical Laboratory needed for toxicology, physical, environmental, analytical chemistry microbiology, product safety testing. Mix component A with component B (Both powders) in water. Mixture creats stable ClO2 in solution at 0.3% consentration at 99.9+% purity. We want the final solution tested. ( read more ).....Closed
07-0995 Materials laboratory needed for physical and mechanical testing of cement ( read more ).....Closed
07-0989 Multinational Manufacturer needs physical laboratory for testing each lot of fabric that we provide, assuming that you cut, prep, test the samples 3 across weight 3 across perm 3 across thickness 3 across mullen burst 3 across warp tensiles & elongation @ 50 lb 3 across fill tensiles & elongation @ 50 lb 3 across warp/fill shrinkage 3 across fabric count ( read more ).....Closed
07-0918 Physical laboratory needed for testing Thermal Insulation in Beverage Containers. Competitive product analysis on various, commercially available, disposable cups using data acquistion to determine the heat retention of a hot liquid (inside cup), as well as insulation on the cup surface (outside cup). ( read more ).....Closed
07-0916 Materials laboratory needed for UL Testing, UL 94 Flammability Testing ( read more ).....Closed
07-0915 Physical laboratory needed for abrasion and impact testing ( read more ).....Closed
07-0909 Physical laboratory needed for fully characterizing the physical and mechanical properties of a newly developed Active packaging technology: Tensile, Elongation, Modulus, COF, Imact, Puncture, Heat seal strength. Samples are a 2 mil EVA based film with our technology incorporated into it. CDA required for more detail ( read more ).....Closed
07-0905 Metallurgical lab needed for ANSI Testing, Magnetic Particle Field (ANSI B31.3) of 4 Pressure Vessels ( read more ).....Closed
07-0902 UKAS Materials laboratory needed for fire safety testing for fire resistant doorlocks ( read more ).....Closed
07-0896 Fiberglass manufacturing company needs physical laboratory for ASTM Testing flexural test as ASTM D 638, ( read more ).....Closed
07-0890 Physical laboratory needed for tribology testing ( read more ).....Closed
07-0879 Physical Laboratory needed for EN peel testing (EN 1372) of Adhesives for floor and wall coverings ( read more ).....Closed
07-0860 Materials laboratory needed for physical testing for color fastness on tiles for in a swimimng pool) to find out if it can be guaranteed for 30 years or more ( read more ).....Closed
07-0830 Physical laboratory needed for thermal conductivity testing ( read more ).....Closed
07-0824 Physical Laboratory needed for ASTM Testing Closed Cup Flash Boiling Point. ( read more ).....Closed
07-0818 Physical laboratory needed for ASTM Testing of Polyester protective sleeve to ASTM 5927 LINE CALL OUT TPE 50211. In addition the other customer ask us following test on our aliminium+fiber glass tube. Thermal Conductivity Test according to ASTM C518,C177 and Thermal Sleeve Heat Insulation according to SAE J2302. ( read more ).....Closed
07-0809 Materials laboratory needed for determining maximun "g force" Realtive Centifugal Force (RCF) for a 50ML tube ( read more ).....Closed
07-0803 Analytical Chemistry laboratory needed for ASTM lubricant analysis, crude oil assay services. - Analysis of lubricants for predictive and preventive maintenance of valuable rotating equipment - Provision