CONTRACT LABORATORY . COM
For more information, please call Toll-Free 1-877-353-0451 or email us
 Login and Control Panel Contact Us Site Map
Find Laboratories for All your Laboratory Testing & Scientific Research !
Register Laboratories and Laboratory Suppliers
Submit Laboratory Testing Requests
Laboratory Testing Requests
Home
Laboratory Directories
Laboratory Careers
Laboratory Events
Laboratory Resources
Laboratory News
Laboratory Requests
Lab Test Requests
Laboratory Directories
Laboratory Service Requests

Science and Laboratory Business Opportunities

Science and Laboratory Product Requests
Test Requests
About Us
toxicology testing, cytotoxicity testing, preclinical testing, sterility testing, analytical chemistry testing, microbiology testing, bioanalytical testing, environmental testing, pharmaceutical testing, food testing, product safety testing, water testing, bioburden testing  2010 Laboratory Test Requests
SEARCH LABORTORY TEST REQUESTS
Search Laboratory Test Requests for:
IMAGE SOURCE:CDC PHIL Technician performing Western Blot testing. Antigens if present will bind and be detected.
Contract Laboratory.com has received the following incoming Laboratory Test Requests which need to be fulfilled ! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational corporations to government agencies actively seeking laboratories to perform their laboratory testing. If your Laboratory receives Laboratory Test Requests that it can not fulfill, please refer them to us! If you have questions, please e-mail us or call 403-770-1992 . View Laboratory Testing Requests Received in 2009
2010 Laboratory Test Requests
#
 Type
Laboratory Testing or Research Description
Status
10-02148Medical Devices and In-Vitro Diagnostics USA FDA FMP Laboratory needed for functionality testing og medical pump for proper function ( read more ).....
10-02147Consumer Products Optical Laboratory needed for sub arc angle deviation testing - Mini Penta Prism 90º+/-3 arc sec. ( read more ).....
10-02146Plastics and Polymers India Analytical Chemistry Laboratory needed to test Oligomers in Polystyrene ( read more ).....
10-02145Plastics and Polymers India ASTM Physical Laboratory needed to test Brittleness temperature of plastics by impact as per ASTM D 746 ( read more ).....
10-02144Nutraceuticals and Dietary Supplements India Microbiology Laboratory needed to test Ayurvedic medicine "Durjalajeta Rasa" for Vibrio cholerae and Salmonella typhi. ( read more ).....
10-02143Environmental and Ecology IS Analytical Chemistry Laboratory needed for testing as per IS:14543 ( read more ).....
10-02142Healthcare and Medical South Africa Toxicology Laboratory needed for Cyanide poisonining testing in a patients serum sample ( read more ).....
10-02141Automotives SAE Laboratory needed to test 16 samples from two suppliers of 1/2-20 wheel studs to the SAE J2316 standard. Section 4.3 - 16 samples Section 4.4 - 16 samples Note: The threaded portion of the wheel stud is 1.0in. We may be interested sending more samples for loss in tension over time. ( read more ).....
10-02140Textiles ISO LABORATORY NEEDED FOR FULL ISO PHYSICAL TESTING TO ISO 12947-2 ( read more ).....
10-02139Pharmaceuticals USA Analytical Chemistry Laboratory needed for USP Testing, extraction of active ingredients to USP 621, 467, 466, 61, 62 verify the percentage to meet label claim as per USP 621, 467, 466, 61, 62 ( read more ).....
10-02138Nutraceuticals and Dietary Supplements INDIA FDA GMP MICROBIOLOGY LABORATORY NEEDED FOR MICROBIAL TESTING, TOTAL VIABLE LIVE COUNT ON PROBIOTICS - About 100 per month ( read more ).....
10-02137Aerospace and Aeronautical Asia Boeing approved Laboratory needed for BSS 7230 Flammability testing, Smoke test and Heat release test for composite parts used in aircrafts As per BSS7230, BSS7322 & BSS7238 ( read more ).....
10-02136Medical Devices and In-Vitro Diagnostics Singapore ISO, FDA GMP Laboratory needed for Ethylene oxide sterilization validation testing and EO residual testing ( read more ).....
10-02135Toys and Childrens Products Eatern USA Consumer Products Safety Laboratory needed for Lead testing (Pb)in Paint and Other Similar Surface Coatings ( read more ).....
10-02134Pharmaceuticals USA FDA Preclinical Contract Research Organization needed to test 14 rodents (rats) injected once under anesthesia(gas isofluorane), monitored for 30 days. Blood and urine collection x 4 (baseline, and 2hrs, 15days, 30 days post injection). Biopsy at day 15, tissue procurement at day 30. ( read more ).....
10-02133Biotechnology USA GLP Bioanalytical Laboratory needed for simulated gastric fluid digestibility on semi-purified proteins. ( read more ).....
10-02132Environmental and Ecology EPA Analytical Chemistry Laboratory needed to test vacuum cleaner debris that contains pills and pill crumbs for the following listed toxic wastes: Leukeran, Cytoxan, Epinephrine, Lindane, Melphalan, Nitroglycerine, Physostigmine, and Warfarin ( read more ).....
10-02131Agriculture Metro Atlanta Pesticide Laboratory needed for testing. ( read more ).....
10-02130Pharmaceuticals Preclinical Contract Research Organization needed for testing of pharmaceutical compound in a rat model of kidney transplantation modelling chronic allograft nephropathy ( read more ).....
10-02129Pharmaceuticals PA, OH, MD Preclinical Contract Research Organization needed to conduct Large Scale Chronic and Acute Bioassays ( read more ).....
10-02128Power and Energy USA Analytical Chemistry Laboratory needed for testing identification of trace quantities of apparent hydrocarbons (C2 to C9). We need to identify what specific isomers of alkanes or alkenes are present. I believe GC-MS is the best approach. We only have a few samples to start with potential for many more depending on price and results. ( read more ).....
10-02127Automotives India Metallurgical Laboratory needed to test Iron ore lumps samples. ( read more ).....
10-02126Cosmetics, Toiletries and Personalcare Products Europe Analytical Chemistry Laboratory needed to test presence of secondary nitrosamines in a cosmetic product. ( read more ).....
10-02125Plastics and Polymers ISO/IEC Laboratory needed for testing of plastic electronic identification cards, e.g., ATM cards, Credit Cards, etc in accordance to IEC 7810. The critical parameter to be tested is the Peel Strength of the Magnetic Band. ( read more ).....
10-02124Pharmaceuticals Preclinical Contract Research Organization needed for toxicology study for tumor promotion -we have isolated new phorbol esters which we suppose to cause tumor promotion similar to regular positive control (TPA) used for the studies. Please give us a feedback with other end parameters we could study during experiment. ( read more ).....
10-02123Rocks and Minerals India Physical Laboratory needed to test Slip Resistance in accordance to ASTM C-1028. ( read more ).....
10-02122Pharmaceuticals West Coast USA Bioanalytical Laboratory needed to measure the amount of Doxycycline in sheep plasma. ( read more ).....
10-02121Pharmaceuticals Preclinical Contract Research Organization needed for testing the effect of one of our drugs in the Concanavalin A induces acute hepatitis model ( read more ).....
10-02120Pharmaceuticals Preclinical Contract Research Organization needed to test the effect of one of our drugs in an animal model (mice) of Uveitis ( read more ).....
10-02119Pharmaceuticals India GMP Bioanalytical Laboratory needed for analysis of finished pharmaceutical product (tablet). Test parameters - Description, Dimension Average gross weight Uniformity of fill weight Hardness Friability Disintegration time Dissolution Moisture content Assay, microbiological assay ( read more ).....
10-02118Medical and Heathcare Analytical Chemistry Laboratory needed to test Hippuric Acid, Tricholoracetic Acid and Pentachlorophenol by GC-MS in human urine. ( read more ).....
10-02117Pharmaceuticals Analytical Chemistry Laboratory needed for viscosity testing of pharmaceuticals liquids ( read more ).....
10-02116Agriculture UK ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR IDENTIFICATION TESTING VERIFICATION TESTING 2-DPMP (Desoxypipradrol, also known as 2-diphenylmethylpiperidine) ( read more ).....
10-02115Environmental and Ecology USA Analytical Chemistry Laboratory needed for thermal ionization mass spec testing isotopes of plutonium,isotopes of Cl and Br using thermal ionization mass spec, isotopic ratio mass spec ( read more ).....
10-02114Agriculture Seed Testing Laboratory needed to test watermelon seeds - ACCIDOVORAX AVENAE PV. CITRULLI - 10,000 seeds to be tested. ( read more ).....
10-02113Metallurgical Europe/USA Metallurgical Laboratory needed to test lead samples for low alpha particles. ( read more ).....
10-02112Mining, Metals and Ores Materials Laboratory needed for testing. ( read more ).....
10-02111Oil and Gas USA Analytical Chemistry Laboratory needed to test natural gas quality ( read more ).....
10-02110Food and Beverages Eastern USA FDA GMP Analytical Food Laboratory needed for beverage testing, label and FDA approval ( read more ).....
10-02109Mining, Metals and Ores Mexico Analytical Chemistry Laboratory needed for core testing of 5-10 core samples of thenardite analyzed for percent of sodium sulfate and percent of insolubles. They will be minded in Mexico and will be 15-70 m long. ( read more ).....
10-02108Environmental and Ecology Radiological Laboratory needed for air testing (alpha, beta), Soil and Water (gamma scan) ( read more ).....
10-02107Medical and Heathcare Coconut Grove, Florida Clinical Laboratory needed for ENA testing. ( read more ).....
10-02106Pharmaceuticals Preclinical Contract Research Organization needed for testing the effect of drugs in development for lowering IOP and protecting the optical nerve in rodent models for Glaucoma ( read more ).....
10-02105Pharmaceuticals India CE Laboratory needed to test product under low directive for CE marking ( read more ).....
10-02104Toys and Children's Products Consumer Products Safety Laboratory needed for product safety testing on an educational product that is being developed. ( read more ).....
10-02103Engineering Mechanical Laboratory needed for dynamic testing of 50mm kingpins in accordance to Australian/New Zealand Standard 4968.3:2003 per Appendix A (Dynamic Test Method), to a D-Rating of 240 KN (kilonewtons). These Kingpins are for heavy articulated vehicles. We already have D-Ratings for the 75mm and 90mm Kingpins and need to find a testing facility that can complete the testing on one of our 50mm Kingpins. It would be appreciated if you could advise of a facility with the capability of carrying out this test with minimal set-up costs. If needed we would consider a testing to a comparable US standard if it has common characteristics to the Australian Standard. ( read more ).....
10-02102Pharmaceuticals Preclinical Contract Research Organization needed for in vivo corenal angiogenesis assay ( read more ).....
10-02101Environmental and Ecology Toxicology Laboratory needed for Respirometry Test using Wastewater Activated Sludge to determine the toxicity of a particular sample. Toxicity is determined by the oxygen uptake rate. ( read more ).....
10-02100Medical Devices and In-Vitro Diagnostics California FDA/ISO Laboratory needed for 510(k) infrared testing ( read more ).....
10-02099Medical Devices and In-Vitro Diagnostics USA Virology Laboratory needed to test human amniotic fluid for HIV-1, HIV-2, Hep-B, Hep-C. This amniotic fluid is used for medical device manufacturing and quality control. ( read more ).....
10-02098Heating Ventilation and Air Conditioning USA NADCA Laboratory needed for Vacuum Test (HVAC duct), 2-4 samples ( read more ).....
10-02097Pharmaceuticals NY FDA GMP Microbiology Laboratory needed for testing as per B.A.M. and O.T.C. and USP ch: 61 & 62. USP Water testing and Swab analysis. ( read more ).....
10-02096Food and Beverages Analytical Food Laboratory needed to test sodium (table salt) content in a prepared food. ( read more ).....
10-02095Electronics Europe Electrical Laboratory needed for electrical impedance characterization ~(0.1 Hz - 10 GHz) ( read more ).....
10-02094Food and Beverages Europe, UK, Asia, Africa Environmental Laboratory needed to test Bio Degradeable LDPE Film used in coffee plantations. The customer requires the film to start biodegrading after 12 months and to be completely bio degraded by 24 months. We need a laboratory certificate confirming our film will do this. ( read more ).....
10-02093Safety Equipment and Supplies USA ASTM Consumer Products Safety Laboratory needed to test safety shoes as per ASTM F2412. ( read more ).....
10-02092Pharmaceuticals Japan Histology Laboratory needed to perform sectioning of paraffin embedded mouse livers and H&E staining. ( read more ).....
10-02091Pharmaceuticals Toxicology Laboratory needed for in vivo testing brain biopsy sample for content of chlorpyrifos. 2. Test human hair for content of chlorpyrifos content ( read more ).....
10-02090Consumer Products UKAS Materials Laboratory needed to test plastic fibers made up of HDPE,LLDPE with UV stabilizers and master match chemicals added for color choices. Need to conduct test for clarity on following factors: 1.Color fastness (UV stablisers) 2.Tear-Strength of the strip. These strips/fibers are also called Synthetic rattan used in outdoor furniture. ( read more ).....
10-02089Plastics and Polymers INDIA ASTM MATERIALS LABORATORY NEEDED TO TEST AS PER ASTM E84/FIRE SPRAY TEST ( read more ).....
10-02088Consumer Products Consumer Products Safety Laboratory needed to test lead content in silver jewelry according to American Standard. ( read more ).....
10-02087Construction and Building UAE ASTM or BSI Physical Laboratory needed to check the Glass Transition Temperature of the Fiberglass Material by Differential Scanning Calorimeter. ( read more ).....
10-02086Oil and Petroleum Australia, Oceania Mechanical Laboratory needed for tests for Pipes joint coating: Film Thickness (DFT) Impact Resistance Adhesion to steel Hot Water Soak/Adhesion Penetration Resistance Cathodic Disbondment Coating Repair ( read more ).....
10-02085Oil and Petroleum US ASTM Analytical Chemistry Laboratory needed for testing as per ASTM D5134-92 Modified ( read more ).....
10-02084Safety Equipment and Supplies USA ANSI Laboratory needed to test Eyewear as per ANSI Z87.1. ( read more ).....
10-02083Food and Beverages FDA/EU Consumer Products Safety Laboratory needed for safety testing for antimicrobial food additive including long term toxicity testing. ( read more ).....
10-02082Medical Devices and In-Vitro Diagnostics UK Mechanical Laboratory needed for prototyping and biomechanical strength testing of a medical device. ( read more ).....
10-02081Electronics ECSS or ASTM Laboratory needed to test samples/ materials for %TML and %CVCM by outgassing analysis according to ECSS- Q-ST-70-02 standard. ( read more ).....
10-02080Pharmaceuticals Bioanalytical Laboratory needed for FFEM or Quick Freeze Deep Etch testing asap for liposome structrual characterization and differentiaton between liposomal formauitons. ( read more ).....
10-02079Aerospace and Aeronautical Materials Laboratory needed for compatibility testing with MMH and NTO as per NASA-STD-6001 test 15 (attached pages 46-50). The materials I would like to get tested are as follows: Lubeco 905 Vitrolube NPI-1220C Braycoat 601 ( read more ).....
10-02078Consumer Products USA Consumer Products Safety Laboratory needed for the following testing: ASTM F 963-08 (Heavy Metal analysis) 16CFR Part 1303 US CPSC CFR 1500.231 Mercury (Hg) US CPSC 16 CFR 1500.231 Ethylene glycol, Diethylene glycol US CPSC 16 CFR 1500.231 Methylene chloride, Toluene, Xylene ( read more ).....
10-02077Automotives ASTM Packaging/Mechanical Laboratory needed for the following testing: SEQUENCE: 1 ELEMENT: A Manual Handling Distribution Simulation Hazards incurred during manual handling such as loading, unloading, dropping, throwing, stacking, sorting or palletizing. DESIGN TESTING PRACTICE FORM Delphi Electronics & Safety PKG WI FOR 651.01.02A Effective Date: March 12, 2006 2 Test Standard- ASTM D4169 (latest revision) Equipment - Lansmont drop tester model PDT-56E Conditioning - ambient Drop Height - 21 inches Drop Sequence - bottom, bottom edge, adjacent bottom edge, bottom corner, diagonally opposite corner Results: SEQUENCE: 2 ELEMENT: D Vehicle Stacking Distribution Simulation Compressive loads that occur during vehicle transport or warehousin ( read more ).....
10-02076Cosmetics, Toiletries and Personalcare Products PACKAGING LABORATORY NEEDED TO TEST A HAIRSPRAY CANNISTER ( read more ).....
10-02075Cosmetics, Toiletries and Personalcare Products USA GLP Analytical Chemistry Laboratory needed for stability testing on fragrances regarding their compatibility with packaging. ( read more ).....
10-02074Pharmaceuticals Canada USP Analytical Chemistry Laboratory needed to run turbidity test on an Iron Sucrose material. ( read more ).....
10-02073Pharmaceuticals Europe Preclinical Contract Research Organization needed for efficacy studies in rabbit for new heparin product of non-mammalian origin ( read more ).....
10-02072Medical Devices and In-Vitro Diagnostics India FDA, GMP, USP Laboratory needed for accelerated aging test. ( read more ).....
10-02071Pharmaceuticals GLP Bioanalytical Laboratory needed to perform assays for interleukin-6, leptin, and serum aldosterone. ( read more ).....
10-02070Cosmetics, Toiletries and Personalcare Products Eastern USA Consumer Products Safety Laboratory needed to test a Hand Cleaner(1) to: Skin Sensitization: OECD section 406 (or other) & Skin Irritation: OECD section 404 (or other) ( read more ).....
10-02069Environmental and Ecology USA Soil Laboratory needed to test mud sample for composition and physical properties. ( read more ).....
10-02068Materials USA A2LA Analytical Chemistry Laboratory needed for XRD testing - Typically would be submitting 3 - 5 samples per week regularly. Must be A2LA accredited. ( read more ).....
10-02067Environmental and Ecology California EPA Laboratory needed for testing as per ASTM D240-02, ASTM D240-87, or ASTM D4809-00 ( read more ).....
10-02066Toys and Children's Products CPSIA Laboratory needed for testing toys. ( read more ).....
10-02065Environmental and Ecology Soil Laboratory needed to test underwater mud sample for composition (relative mix of sand, clay, organic, etc.) and when submerged what level of disturbance will cause it to liquify. ( read more )..... Closed
10-02064Occupational Health and Hygiene Bay Area, California Microbiology Laboratory needed to swab areas such as locker rooms, athletic facilities, dorms to identify potential bacteria, virus or any other microorganism that may cause health risks. ( read more ).....
10-02063Oil and Petroleum USA ASTM Analytical Chemistry Laboratory needed for testing 2 samples (diesel and naptha) ( read more ).....
10-02062Pharmaceuticals GMP Analytical Chemistry Laboratory needed for Circular Dichroism testing. ( read more ).....
10-02061Pharmaceuticals R&D Bioanalytical Laboratory needed for FFEM structural analysis of a liposomal suspension ( read more ).....
10-02060Medical and Heathcare Clinical Laboratory needed for serology testing for viruses (HB, HCV, EBV) (need to test ~2,000 sera samples) ( read more ).....
10-02059Occupational Health and Hygiene Andalucia, Spain Environmental Laboratory needed for VOC measurement and analysis in clean room. ( read more ).....
10-02058Food and Beverages Toxicology Laboratory needed for caffeine quantification in 1000+ oral fluid samples ( read more ).....
10-02057Consumer Products Ontario, Canada Mechanical Laboratory needed for testing tensile, yield, elongation and Rockwell Hardness on 3 samples of steel bars. Sample #1 - Unknown mtl. 22 cm length X 2 cm wide X 2mm thick Sample # 2 Unknown mtl. 22 cm length X 2 cm wide X 2mm thick Sample # 3 - Aluminum H 5052-34 22 cm length X 2.5 cm wide X 2mm thick Sample # 4 - Aluminum 6061 T6 22 cm length X 2.5 cm wide X 2mm thick ( read more ).....
10-02056Industrial Equipment and Suppies Southern CA ASTM, ASME, FDA/GMP Metallurgical Laboratory needed for non-destructive analysis/verification of raw material alloys, such as; 17-4 and other Stainless Steels, Ti 6AI-4V ELI Titanium, Aluminum, Etc. ( read more ).....
10-02055Agriculture USA ASTM Packaging Laboratory needed for ASTM testing, ASTM F-88 ( read more ).....
10-02054Biotechnology GLP/GMP Bioanalytical Laboratory needed for development and routine testing by quantitive single radial immunodiffusion, sample # unknown. antibody, and reference antigen available ( read more ).....
10-02053Biotechnology WestCoast USA Molecular Biology Laboratory needed to have a frozen sample of bone marrow derived cells thawed and analyzed to determine viability plus the type and numbers of stem & progenitor cells present (Mesenchymals, CD34++, etc) ( read more ).....
10-02052Textiles UK BS MATERIALS LABORATORY NEEDED FOR BS 5853 FLAMMABILITY: CIGARETTE & MATCH + FULL PHYSICAL TEST FOR GENERAL DOMESTIC USE ( read more ).....
10-02051Mining, Metals and Ores India Geological Laboratory needed to have mining samples analyzed and identify the elements contained in the sample. ( read more ).....
10-02050Chemicals Scotland, United Kingdom Analytical Chemistry Laboratory needed for testing sample jars coating/paint chips to establish the presence or absence of any tin product. The aim of the test is to establish whether a vessel is free of Tributyl Tin or Triphenyl Tin. ( read more ).....
10-02049Agriculture Malaysia - Kuala Lumpur Analytical Chemistry Laboratory needed for testing to create a MSDS (Materials Safety Data Sheet) for a fertilizer ( read more ).....
10-02048Power and Energy China NFC Laboratory needed for outdoor weathering test for Aerial Bundled Cables as per NFC 33-209 ( read more ).....
10-02047Medical Devices and In-Vitro Diagnostics USA ISO Laboratory needed for fifteen samples of medical devices to be tested for phthalate in support of CE Mark. ( read more ).....
10-02046Pharmaceuticals CA Analytical Chemistry Laboratory needed for Karl Fischer Analysis ( read more ).....
10-02045Pharmaceuticals USA Bioanalytical Laboratory needed for NanoImaging and characterization of biopharmaceuticals formulations. ( read more ).....
10-02044Medical and Heathcare USA Analytical Chemistry Laboratory needed to do some validation and qualification testing on reagents that are received from outside vendors to confirm that the certificate of analysis that we receive from the manufacturer is accurate. The following reagents we would need tested: Reagent 1: Citrate Phosphate Dextrose collection bag. Tests: Sterility, Identification of CPD reagents in bag. Reagent 2: CryoSure-Dex40. Tests: Identification of DMSO and Dextran40 (w/v), Pyrogen, Mycoplasma, Sterility, and Endotoxin testing. Reagent 3: 6% Hetastarch in 0.9% Sodium Chloride Injection Tests: Identification of reagents used, Sterility, Bacterial Endotoxin testing, pH, viscosity, weight average ( read more ).....
10-02043Pharmaceuticals Preclinical Contract Research Organization needed for testing gastric emptying in monkey in order to evaluate drugs on this parameter. ( read more ).....
10-02042Agriculture USA GLP Analytical Chemistry Laboratory needed for pesticide testing for reregistration. ( read more ).....
10-02041Environmental and Ecology Asia Microbiology Laboratory needed for enteric virus testing for sludge sample ( read more ).....
10-02040Pharmaceuticals South Korea GLP Bioanalytical Laboratory needed for Viral inactivation kinetics tests in duplicate 1) Crab shell suspenson in HCl, spiked with HAV, Polio, and PPV (separtely). 2) Crab shell suspension in NaOH after HCl-treatment (1), spiked with HAV, Polio, and PPV (separtely). 3) Treatment time: 0-1 min, 60min, 4hr, 8hr ( read more ).....
10-02039Pulp, Paper and Wood Products Metallurgical Laboratory needed for testing of metal/chemical composition of SS tubes of SS 304 and SS 316. ( read more ).....
10-02038Materials Canada/USA Analytical Chemistry Laboratory needed for: identification of wood on historical artifact, identification of constituents of stain used identification of unidentified organic substance ( read more ).....
10-02037Pharmaceuticals USA, Asia, or Europe FDA GMP Laboratory needed to measure Cu2+ concentration for protein drug/3-4 samples/LOQ better than 50 ppb/method has been validated ( read more ).....
10-02036Pharmaceuticals OECD Bioanalytical Laboratory needed to perform determination for Kow on a small molecule pharmaceutical product as per OECD method 107. ( read more ).....
10-02035Metallurgical Europe/USA Analytical Chemistry Laboratory needed to test Lead for alpha particles, to determine its quality, hence the term "Low Alpha Lead". ( read more ).....
10-02034Nutraceuticals and Dietary Supplements USA FDA/GMP/USP Analytical Chemistry Laboratory needed to perform a series of identification (and possibly quantitative) tests. We have identified a number of possible identification tests for some of the ingredients which we can provide. We require your expertise to identify and/or develop identification methods for the ingredients without possible methods. Also we would like to have the price quotation, as well as an indication on the turn around time for the completion of this project We have around 57 samples that includes botanical and botanical extracts. ( read more ).....
10-02033Pharmaceuticals Analytical Chemistry Laboratory needed to identify and test purity of a number of products such as:  5,6-Methylenedioxy-2-aminoindane - CAS number 132741-81-2  6,7-Methylenedioxy-2-aminotetralin - CAS number 101625-35-8  5-Iodo-2-aminoindane - CAS number - 132367-76-1 6-(2-aminopropyl)benzofuran or 1-benzofuran-6-ylpropan-2-amine - CAS number 286834-85-3  3-diethylamino-2,2-dimethylpropyl)-4-aminobenzoate - CAS number 94-15-5 ( read more ).....
10-02032Pharmaceuticals Bioanalytical Laboratory needed to measure fatty acid content/composition in biological samples eg tissues, cells and serum from mice. This can be done using extraction and GC FID, or alternative technique. Approximately 16 samples are to be analyzed. ( read more ).....
10-02031Pharmaceuticals Analytical Laboratory needed to test Human growth hormone (GLOTROPIN) purchased in Thailand for its active ingredient (HGH) and excipients. Samples can be shipped by FEDEX or DHL asap. ( read more ).....
10-02030Food and Beverages Analytical Chemistry Laboratory needed to conduct Thermal Conductivity testing on coconut husk. ( read more ).....
10-02029Food and Beverages Analytical Food Laboratory needed for testing to determine the product composition "so we know what the formula, ingredient is used in our products" ( read more ).....
10-02028Medical Devices and In-Vitro Diagnostics Australia Materials Laboratory needed for absorbency testing for cotton sponge gauzes - As per relevant Australian Standard (cotton sponge gauzes - medical device) ( read more ).....
10-02027Textiles Brighton UK Toxicology Laboratory needed for testing large items of upholstery for chemical treatments which may be affecting health (respiratory and skin difficulties experienced) ( read more ).....
10-02026Food and Beverages USA Nutritional Laboratory needed for analysis for consumer labeling purposes of a sports supplement product ( read more ).....
10-02025Food and Beverages UK Clinical Laboratory needed for human In Vivo Clinical Trial testing for Glycemic Index of Chocolate ( read more ).....
10-02024Medical Devices and In-Vitro Diagnostics Middle East ISO Laboratory needed for spinal construction cyclic test as per ISO 12189. ( read more ).....
10-02023Engineering Metallurgical Laboratory needed for failure analysis ( read more ).....
10-02022Medical Devices and In-Vitro Diagnostics USA/India FDA GMP/GLP Preclinical Contract Research Organization needed for in-vitro drug release analysis of medical device, Stability Studies for medical devices, Sample as required for testing. ( read more ).....
10-02021Construction and Building USA/Asia Materials Laboratory needed for DIN 18032- part2 testing with and without black rubber underlayment 0.032lbs/in3 for the 5.2 shock attenuation test ( read more ).....
10-02020Consumer Products WestCoast USA BS EN Laboratory needed to perform Nickel Release Test as per BS EN 1811:1999 standard ( read more ).....
10-02019Industrial Equipment and Suppies Houston, TX Laboratory needed to UL certify Desiccant Dehumidifiers. ( read more ).....
10-02018Medical Devices and In-Vitro Diagnostics FDA Preclinical Contract Research Organization needed for biocompatibility testing on a peripheral catheter product line. How many samples are needed for each test and the turn around time for each test (regular and expedited)?  Cytotoxicity  Sensitization  Irritation or intracutaneous reactivity  System toxicity (acute)  Subchronic toxicity (subacute toxicity)  Genotoxicity  Haemocompatibility ( read more ).....
10-02017Oil and Petroleum US Analytical Chemistry Laboratory needed for vapor pressure curves on naphtha and some heavier samples, all liquid at room temperature ( read more ).....
10-02016Aerospace and Aeronautical USA Analytical Chemistry Laboratory needed for MSEP rating when tested at the Maximum Allowable Concentration (MAC) ( read more ).....
10-02015Cosmetics, Toiletries and Personalcare Products USA Microbiology Laboratory needed for testing of antifungal property of antiperspirant gel product using aegle marmelos oil. ( read more ).....
10-02014Textiles India Analytical Chemistry Laboratory needed for testing Intrensic viscosity, DEG, Carboxyl groups, melting point, L&b colour of polyester chips ( read more ).....
10-02013Biotechnology GMP, ISO, USP, EP Bioanalytical Laboratory needed for the following testing: >N-terminal amino acid sequence, mass analysis (MALDI-ToF Mss, Molecular weight) >C-terminal amino acid sequence, the assignment of S-S bridge positions in amino-acid sequences, Analysis of amino-acid sequences, >Sugar chain structural analysis ( read more ).....
10-02012Environmental and Ecology NY ELAP Analytical Chemistry Laboratory needed for PCE and TCE by 6200 B/C Mercury by 3112B no substitutions!! ( read more ).....
10-02011Pharmaceuticals Preclinical Contract Research Organization needed for IgM and IgG antibody test designed to identify the active or remote presence of a specific Trematode infection in the human body that has not yet been developed. ( read more ).....
10-02010Medical Devices and In-Vitro Diagnostics US/Canada/Ireland ISO, GLP, ASTM Laboratory needed for Genotoxicity, MRI Compatibility/Safety Test for CE Marking. ( read more ).....
10-02009Pharmaceuticals USA cGMP, FDA Laboratory needed to develop method for BVL or commit to routine testing on behalf of BVL for the quantitation of Parrafin content in an active ingredient of a pharmaceutical product manufactured at BVL. The content of the Parrafins in the Active Ingredient is between 0.1 and 2 ppm. ( read more ).....
10-02008Medical and Heathcare USA Clinical Laboratory needed to test for oxytocin levels. ( read more ).....
10-02007Cosmetics, Toiletries and Personalcare Products Bioanalytical Laboratory needed for Osmolarity testing. ( read more ).....
10-02006Medical and Heathcare Germany (prefer EU) Clinical Laboratory needed for BAP testing. ( read more ).....
10-02005Aerospace and Aeronautical WestCoast USA Laboratory needed for G-Switch Activation tested in a 4KG device to meet FAA TSO C126 or ED-62 activation requirements. ( read more ).....
10-02004Food and Beverages USA(NY/NY/CT) Analytical Food Laboratory needed for shelf stability testing, nutritional analysis, chemical and microbiological analysis for a refrigerated food product (hummus) ( read more ).....
10-02003Pharmaceuticals Virology Laboratory needed for genotype OR phenotype resistance testing for adenovirus, CMV, BKV, JCV, EBV, HSV-1 or -2, VZV, human papilloma virus, ( read more ).....
10-02002Natural Products Microbiology Laboratory needed for testing. ( read more ).....
10-02001Safety Equipment and Supplies China Consumer Products Safety Laboratory needed to do a CE EN 14604 test on a smoke detector. The product will be sold in France so it needs to comply by this standard. 2 samples to be tested. ( read more ).....
10-02000Pharmaceuticals India USFDA Analytical Chemistry Laboratory needed to test assay of Hydroxypropyl cellulose by USP i.e. Hydroxypropoxy group ( read more ).....
10-01999Pharmaceuticals USA FDA GMP Analytical Chemistry Laboratory needed to develop, qualify and do routine single radial immunodiffusion analysis (SRID) for quantitation of soluble antigens. ( read more ).....
10-01998Chemicals Tampa Analytical Chemistry Laboratory needed for liquid SO2 contamination analysis and collection for contamination due to exposure to moisture and oil residues. ( read more ).....
10-01997Cosmetics, Toiletries and Personalcare Products Microbiology Laboratory needed for cosmetics, microbial testing on several species such as Trichophyton, Surviving Test/ Percentage of Killing rates of bacteria on shower gel product. Verification of Surviving Microb Test and Percentage of Kill within 5mins, 10mins... Requested strain would be : Trichophyton mentagrophytes Trichophyton rubrum Cornebacterium xerosis Propionibacterium acnes. Customer would like to claim Kill 99.99% germs for their Shower Gel. ( read more ).....
10-01996Nutraceuticals and Dietary Supplements Leading manufacturer of Ayurvedic herbal medicine needs Preclinical Contract Research Organization for testing a new medicine for ANTI HIV. ( read more ).....
10-01995Plastics and Polymers Canada/USA ASTM Environmental Laboratory needed to test biodegradable plastic bags for their degrading ability. Bags are used for portable toilets to contain human waste. ( read more ).....
10-01994Cosmetics, Toiletries and Personalcare Products Malaysia ISO Microbiology Laboratory needed for testing antimicrobial value of toothpaste against streptococcus mutans or any other oral bacteria. there will have 2 toothpaste samples: one with antibacterial agent one without antibacterial agent ( read more ).....
10-01993Pharmaceuticals Contract Analytical Organization (GMP) needed for transfer, possible development, qualification, and testing of residual ficin by MALDI MS. ( read more ).....
10-01992Safety Equipment and Supplies South Australia Laboratory needed for fire-fighting testing. ( read more ).....
10-01991Food and Beverages Europe Analytical Food Laboratory needed to investigate the origin of precipitate(white non soluble powder) in suriflavor which have naturally fallen out during storage and determine if they are toxic. We know composition of this flavor,so this information will be provided. ( read more ).....
10-01990Medical and Heathcare USA LABORATORY NEEDED TO PERFORM HEPATITIS C P28 GENE EXPRESSION TEST. ( read more ).....
10-01989Oil and Gas ISO Analytical Chemistry Laboratory needed to test gas N2O by CODEX method in accordance to ISO 17025. ( read more ).....
10-01988Agriculture Analytical Chemistry Laboratory needed for total solids tests using Test Method PM/01161/01e. ( read more ).....
10-01987Food and Beverages Montréal or Toronto Consumer Products Safety Laboratory needed to perform safety tests on 3 components (small parts) destined to young children between 1-6 years old. ( read more ).....
10-01986Consumer Products Athens Analytical Chemistry Laboratory needed to test lavender oil for purity-will send as many samples as needed. ( read more ).....
10-01985Pharmaceuticals Seattle Mechanical Laboratory needed for the following: 1. Rotate element on 3/8 shaft in 1 degree increments through 360 degree range. For each degree, pull piston and measure peak force for .5 inch stroke. 2. At peak force angle pull piston measuring force vs distance for .5 inch stroke. 3. At peak force angle measure torque required to rotate. Forces < 50#, Torque < 25in-oz ( read more ).....
10-01984Mining, Metals and Ores Gauteng/NW South Africa Analytical Chemistry Laboratory needed to perform milling and flotation test work for sulphide tails. ( read more ).....
10-01983Textiles EU Analytical Chemistry Laboratory needed to test Vectran fibre for 6-hydroxy-2-naphthalene carboxylic acid to detection limit of 0.05 ppm. ( read more ).....
10-01982Oil and Petroleum Australia Analytical Chemistry Laboratory needed for Crude Quality testing (3 samples) as follows: 1) density of Oil at 15.6 degree Celsius to determine if oil is Light, Medium or Heavy 2) Measurement of Sulphur Content to determine if oil is sweet or sour 3). Chemical Composition of Crude ( read more )..... Closed
10-01981Medical Devices and In-Vitro Diagnostics USA/Canada/Europe GLP Clinical Laboratory needed for evaluation of a diagnostic monoclonal antibody testing kit ( read more ).....
10-01980Food and Beverages Midwest USA Analytical Chemistry Laboratory needed for VOC. ( read more ).....
10-01979Electrical India Electrical Laboratory needed for test IEC-61238-1 in accordance to DIN 61235 ( read more ).....
10-01978Chemicals USA Analytical Chemistry Laboratory needed to test solvent for: LEL(Lower explosive Limit) UEL(Upper explosive Limit) Auto ignition point Flash Point ( read more ).....
10-01977Plastics and Polymers India/USA ASHRAE Laboratory needed to test Diffuser for Air throw, Noise level, Air Output etc. as per ASHRAE standards ( read more ).....
10-01976Pharmaceuticals Laboratory In-Vitro Contract Research Organization needed to test nerve excitatory responses upon the application of various drug substances ( read more ).....
10-01975Electronics HK Asia FDA/ISO Packaging Laboratory needed for testing the resistibility of our products packages during Air, Sea and ground transportation Number of samples - 3 ( read more ).....
10-01974Construction and Building Australia/Hong Kong AS Materials Laboratory needed for testing to obtain certificate of AS 4992 (Australian Standard,for tile adhesive and grout) Two Samples ( read more ).....
10-01973Pulp, Paper and Wood Products MECHANICAL LABORATORY NEEDED FOR JANKA HARDWOOD FLOORING TEST ON SAMPLES OF MAPLE FLOORING. ( read more ).....
10-01972Food and Beverages USA, North Dakota Microbiology Laboratory needed to test for Listeria, Salmonella for environmental sampling program. ( read more ).....
10-01971Household Products Midwestern USA Sensory Laboratory needed for testing of candle air freshener - Looking at comparing fragrance delivery (fragrance development and fragrance throw) of two burner units ... looking at which delivers more fragrance faster. ( read more ).....
10-01970Consumer Products Consumer Products Safety Laboratory needed to test Bed Pillow for the following: a.Dust mite allergen impermeability (so it doesn't fill up with allergens) b.Washability: does the pillow hold up to 15 washes? c. Free of irritants i.Formaldehyde ii.Flame retardants iii.Pesticide iv.Neutral pH v.Volatile Organic Compounds: safe per MSDS requirements ( read more ).....
10-01969Plastics and Polymers India Physical Laboratory needed to test 19 mm thick Polyethylene foam for thermal conductivity in accordance to ASTM C518 or IS 3346. ( read more ).....
10-01968Construction and Building ASTM, AASHTO Materials Laboratory needed for evaluation of Reclaimed Asphalt Pavement, Recovery of Aged Asphalt Binder from RAP, Determination of amount and grade of Rejuvenating Agent required using Viscosity Blending Chart, Recycled Hot Mix Asphalt Design Development ( read more ).....
10-01967Cosmetics, Toiletries and Personalcare Products Canada Consumer Products Safety Laboratory needed to test baby skin care products for safety and effectiveness of sunscreen. ( read more ).....
10-01966Industrial Equipment and Suppies Ontario Mechanical Laboratory needed to perform lifting lug proof load tests on 3 centrifugal pump baseplates. Prefer Burlington / Mississauga / Toronto area ( read more ).....
10-01965Plastics and Polymers Physical Laboratory needed to perform proficiency test on PolyVinyl Chloride ( read more ).....
10-01964Chemicals ANALYTICAL CHEMISTRY LABORATORY NEEDED TO IDENTIFY TEMPERATURE AT WHICH Fe2O3, THE RED POWDER COMPLETELY GIVES OFF ALL OF ITS OXYGEN AND BECOMES PURE Fe QUANTITATIVELY ( read more ).....
10-01963Pharmaceuticals Preclinical Contract Research Organization needed to measure Resveratrol in mice plasma and tissues after gavage feeding. ( read more ).....
10-01962Medical Devices and In-Vitro Diagnostics Non-GLP ASTM Laboratory needed for the following toxicology tests to be performed in accordance to ASTM E1299-96: 1. chemical ingestion 2. primary skin 3. primary eye 4. acute oral tox-udp ( read more )..... Closed
10-01961Pharmaceuticals FDA Laboratory needed to test vitamin/minerals in custom formulations to maintain cGMP compliance. ( read more ).....
10-01960Food and Beverages Microbiology Laboratory needed to test drinking water for total coliform, fecal coliform, and total aerobic bacterial count. ( read more ).....
10-01959Oil and Petroleum Denver, Colorado Analytical Chemistry Laboratory needed to test propane sample for excessive water or other foreign excellerants - one sample ( read more ).....
10-01958Cosmetics, Toiletries and Personalcare Products Asia/USA/Europe FDA Consumer Products Safety Laboratory needed for toxicology testing for cosmetics. ( read more ).....
10-01957Pharmaceuticals USA Preclinical Contract Research Organization needed to test compounds against HIV in cell culture. ( read more ).....
10-01956Cosmetics, Toiletries and Personalcare Products USA Microbiology Laboratory needed for testing skin care products for bacteria...then test open product after 3 months for same. ( read more ).....
10-01955Electrical Electrical Laboratory needed to test cable lugs as per IEC 61238-1 ( read more ).....
10-01954Oil and Petroleum South Africa Analytical Chemistry Laboratory needed to perform oil analysis. ( read more ).....
10-01953Chemicals Microbiology Laboratory needed to perform endotoxine testing for N-Methyl Piperazine ( read more ).....
10-01952Textiles Materials Laboratory needed for durability testing of seat cushion material as per per SAE J1454. ( read more ).....
10-01951Pharmaceuticals USA GMP Preclinical Contract Research Organization needed for Prothrombin clotting assay. Use of Coag A Mate(registered) Instrumentation ( read more ).....
10-01950Animal Health and Veterinary Science Veterinary Laboratory needed to perform progesterone tests on fecal samples collected from moose in Wyoming in order to assess pregnancy. ( read more ).....
10-01949Materials USA NADCAP Laboratory needed to perform Radiography and Liquid Penetrant testing to AWS D17.1:2001 and BAC5962 ( read more ).....
10-01948Microbiology Europe or USA/Canada Microbiology Laboratory needed for minimum inhibitory concentration testing of our candidate compound in bacterial Francisella tularensis using published micro dilution techniques. ( read more ).....
10-01947Nutraceuticals and Dietary Supplements Nigeria Preclinical Contract Research Organization needed for In vitro toxicology testing especially in Plants used for alternative medicine ( read more ).....
10-01946Pharmaceuticals Large Pharma needs Bioanalytical Laboratory for a rapid method test for the quantization of a 7-carbon monosaccharide in a raw material matrix (fruit) as well as in a final ingredient matrix (fruit sugar concentrate). Identify technology which:  Will provide a turnaround time <24 hours for the specific detection of a targeted 7 carbon monosaccharide in a raw ingredient including equipment set up, calibration, and sample run time.  Preferably utilizes common lab equipment found in a food processing lab or plant  Will support plant production runs by providing fast results allowing optimization of processing equipment "on the spot" and for stability assessments Patent protection is preferred but not required. ( read more ).....
10-01945Oil and Petroleum Nigeria, Africa Analytical Chemistry Laboratory needed for specification tests for Diesel fuel:pour point,cloud point,flash point ( read more )..... Closed
10-01944Consumer Products ISO Analytical Chemistry Laboratory needed for identification for Solubility, Chromatography, Carbon dioxide test and PURITY for Carbon monoxide, Nitric oxide, Nitrogen dioxide, Halogens (as Cl), Ammonia in accordance to ISO 17025. ( read more ).....
10-01943Food and Beverages USA or Canada Analytical Chemistry Laboratory needed to perform flashpoint analysis. Will need about 40 items tested per month for about 10 months so the lab must have an efficient automated tester and a suitably low price per test. ( read more ).....
10-01942Oil and Petroleum ANALYTICAL CHEMISTRY LABORATORY NEEDED TO PERFORM XRF/XRDF TEST IN DEPOSIT COLLECTED FROM OIL PIPE LINE. ( read more ).....
10-01941Food and Beverages USA Analytical Food Laboratory needed for FCC monograph test, oxyethylene determination on Polysorbate 60 and Polysorbate 80. FCC apendix VII ( read more ).....
10-01940Pharmaceuticals Preclinical Contract Research Organization needed for radioactive (14C) ADME studies in Rat, Dog and Monkey ( read more ).....
10-01939Pharmaceuticals USA/UK Preclinical Contract Research Organization needed for rat gastric emptying ( read more ).....
10-01938Electronics Slovenia or Hungary Physical Laboratory needed for Temperature Cycling Testing: 3 cycles in the temperature range of 0 to +70 deg.C. The cycle time shall allow a thermal tabilization after each temperature change, but not less than one-hour. The rate of the temperature change shall be 5°C per minute max. ( read more ).....
10-01937Engineering USA ASTM Metallurgical Laboratory needed for quenched and tempered steel specimens with different tempering temperatures, wish to have: (a) photos of microstructure (b)determination of average prior austenite grain size (c) determination of per cent retained austenite. Five different specimens. ( read more ).....
10-01936Pharmaceuticals USA FDA ICH Preclinical Contract Research Organization needed to conduct preclinical studies to support a Phase 1 IND filign for a new drug. We need genotoxicity, mutagenicity, repeat dose toxicology in 2 species (rodent and nonrodent) with toxicokinetics and histopathology, and safety pharmacology to support a chronic long-term use in human patients. ( read more ).....
10-01935Occupational Health and Hygiene Philadelphia Microbiology Laboratory needed for Swab testing of bathroom surfaces as well as environmental. ( read more ).....
10-01934Occupational Health and Hygiene Philadelphia Microbiology Laboratory needed to perform testing for a study involving hand dryers ( read more ).....
10-01933Food and Beverages South Carolina FDA GMP Analytical Chemistry Laboratory needed for nutritional testing, Calorie Count ( read more ).....
10-01932Pharmaceuticals Preclinical Contract Research Organization needed for in vitro oncology assays, cell migration assays (eg. Boyden chamber), MMP zymography, cell cycle analysis. If you are able to provide analysis, please advise if you have glioma cell lines in house that you could utilize for the assays? I am interested in your capabilities with respect to the above, and the timeline and costs if we were to request such assays. ( read more ).....
10-01931Consumer Products Analytical Chemistry Laboratory needed for testing free formaldehyde and Free Phenol content in syntan product. ( read more ).....
10-01930Medical Devices and In-Vitro Diagnostics Eastern USA FDA, GMP, GLP Clinical Laboratory needed for the following proposed tests on blood samples collected before and after processing: 1. Concentration of ATP in RBC's 2. Concentration of 2,3-DPG in RBC's 3. p50 (oxygen dissociation curve) 4. Complete Clood count, CBC (RBC, MCV, MCHC, MCH, WBC (no diff), Hb, Hct) 5. Plasma electrolytes (Na+ and K+) 6. Plasma osmolality ( read more ).....
10-01929Food and Beverages India Analytical Food Laboratory needed for the following testing: Description of product Heavy Metals Microbiological count Steroids Active Ingredients ( read more ).....
10-01928Chemicals Oxidation Chemistry Laboratory needed - Prefer facility with documented experience on the production of Terephthalic acid from para-xylene at 10 - 25 kg scale ( read more ).....
10-01927Electronics Bangalore, India Electrical Laboratory needed to test new RJ45 connector for CAT7 cable. ( read more ).....
10-01926Pharmaceuticals Europe GLP Toxicology Laboratory needed for Ames test, acute toxicity in mice, two weeks toxicity in rats, 1-2 samples ( read more ).....
10-01925Microbiology India CLSI Microbiology Laboratory needed for testing. ( read more ).....
10-01924Food and Beverages BIS Analytical Food Laboratory needed for BIS testing Packaged Drinking Water Unit to obtain BIS Certification : Raw Water Analysis Product Water Analysis Packaging Materials : ½ lit., 1 lit. and 2 lit. Pet Bottle 20 ltr. Jar and 250 ml. Pouch ( read more ).....
10-01923Consumer Products USA GLP/ISO Bioanalytical Laboratory needed for identification of fish species by isoelectric focusing electrophoresis using AOAC Method 980.16 ( read more ).....
10-01922Consumer Products US FDA/DEA Analytical Chemistry Laboratory needed to have an herbal blend tested to verify that it does not contain THC, JWH-018, JWH-073, CP 47-947, or HU-210. ( read more ).....
10-01921Pharmaceuticals Microbiology Laboratory needed to test bandages to determine if they are Pyronema free ( read more ).....
10-01920Consumer Products South Eastern USA CPSC/ASTM Laboratory needed to test for allergy, ingestion, flammability, philates in plastic, surface interaction for paper based fragrance sticks ( read more ).....
10-01919Medical Devices and In-Vitro Diagnostics Clinical Laboratory needed for PAP test (cervical screening with SurePath) ( read more ).....
10-01918Biotechnology USA Bioanalytical Laboratory needed for immunohistochemistry (CD31) on rat muscle that is already paraffin embedded ( read more ).....
10-01917Cosmetics, Toiletries and Personalcare Products Indonesia Microbiology Laboratory needed to test for regular Total Plate Count (bacteria, yield, moulds) for sanitary napkin & tissue products ( read more ).....
10-01916Occupational Health and Hygiene Environmental Laboratory needed to test air quality in lab. ( read more ).....
10-01915Food and Beverages Analytical Food Laboratory needed for olive oil test that would verify it will pass the FDA test as well as an overall purity test ( read more ).....
10-01914Electrical India ISO Electrical Laboratory for ISO testing 33 kv isolators ( read more ).....
10-01913Medical Devices and In-Vitro Diagnostics Non GLP Preclinical Contract Research Organization CRO needed for chemical ingestion toxicity study for preclinical testing: 10 treated animals, 10 control animals, 14 day observation phase. non-glp... primary skin: 3 rabbits + primary eye: 3 rabbits + acute oral tox: limit 5000 ( read more )..... Closed
10-01912Automotives India Mechanical Laboratory needed for durability testing: Durabilty Test of hanger Sine wave test frq.- 20+/-5 Hz Test Dir.- Z-direction Apply Load - +/- 75N 2. Durability testing of pipe Sine wave test frq.- 20+/-5 Hz Test Dir.- Z-direction Apply Load - 58.6 Nm ( read more ).....
10-01911Plastics and Polymers India Physical Laboratory needed for IS thermal conductivity testing for expanded polystyrene sample ( read more ).....
10-01910Medical Devices and In-Vitro Diagnostics USA Laboratory needed for ANSI/AAMI testing blood pressure transducers to ANSI/AAMI BP22:1994/(R)2006 to obtain a test report. No submittals or certifications are involved. ( read more ).....
10-01909Oil and Petroleum Oregon ASTM Analytical Chemistry Laboratory needed to test dielectric strength of transformer oil in accordance to ASTM D 149-97a ( read more ).....
10-01908Medical Devices and In-Vitro Diagnostics USA Clinical Laboratory needed for Glucose meter accuracy test for 4 diabetes meters. ( read more ).....
10-01907Medical Devices and In-Vitro Diagnostics Ontario, Canada ISO Laboratory needed for medical device biological safety testing according to ISO 10993-1:2003 for CE Compliance. one piece of plastic sample and one piece of metal sample. ( read more ).....
10-01906Medical Devices and In-Vitro Diagnostics ISO 17025 Laboratory needed for testing in accordance to ISO 10993 Parts 3,5,6,7,10,11&15 ( read more ).....
10-01905Pharmaceuticals Asia GLP Toxicology Laboratory needed for toxicological test for Cordyceps militaris and ortohsiphon stamineus ( read more ).....
10-01904Pharmaceuticals Large Pharma needs FDA GMP Bioanalytical Laboratory for enzymic assay for HMG-CoA reductase activity in human plasma samples. ( read more ).....
10-01903Medical and Heathcare Europe Analytical Chemistry Laboratory needed for ICP-MS, ICP-OES analysis. ( read more ).....
10-01902Rocks and Minerals Non-Destructive Laboratory needed for analyzing historical objects to determine if they were made from meteorites and compare them without damaging them, or removing samples. For decades, historians have debated the origin of iron used in prehistoric times by Natives of the Northwest Coast of North America to make tools and weapons.Many iron tools, especially knives or daggers are now in museum collections or owned by Natives. The objects are now heirlooms or "cultural treasures." Some are said to have been made from meteorites. If the element contents and proportions could be determined it would open a new door to historical research. ( read more ).....
10-01901Oil and Petroleum Analytical Chemistry Laboratory needed for Saybolt Color (ASTM D156)and Platinum Cobalt Color (ASTM D1209) testing on some oil samples. ( read more ).....
10-01900Aerospace and Aeronautical Your Largo location ASTM Mechanical Laboratory needed for Short Beam Shear testing in accordance to ASTM D2344(SBS) ( read more ).....
10-01899Pharmaceuticals USA/China GLP Preclinical Contract Research Organization needed for 2 anilam tox studies of intanasal tox, 1 non-rodent; BID treatment for 4 weeks ( read more ).....
10-01898Electronics India (UP) NABL Mechanical Laboratory needed for Vibration and Shock Test, Dump Heat Test, Dry Heat Test, EMC/EMI, IP 23, etc. Functional Test after each and every testing, Insulation & High Voltage, Reverse Polarity etc of Electronic Controller Card (PCB) of Brushless DC Railway Carriage Fan ( read more ).....
10-01897Pharmaceuticals USA GLP Bioanalytical Laboratory needed for testing for the presence of microemusions ( read more ).....
10-01896Environmental and Ecology Microbiology Laboratory needed to inspect sections of wood planks to check for fungal decay & antifungal properties ( read more ).....
10-01895Environmental and Ecology Analytical Chemistry Laboratory needed to perform Reactive Cyanide, Reactive Sulfide and explosiveness (explosibility, explodability?). Please advise cost for one solid or dust sample, sample size and please include the test method. I have an EPA file for the explodability, however I can not attach it to this message. ( read more ).....
10-01894Pharmaceuticals Mid Atlantic Bioanalytical Laboratory needed to test 5 Fluorouracil ( read more ).....
10-01893Pharmaceuticals Canada Preclinical Contract Research Organization needed for measurement of the small molecule metabolite 2-hydroxyglutarate in sera, cell and tissue extracts. Potential for hundreds of samples over the next few years. Published LC/MS and GC/MS protocols available. ( read more ).....
10-01892Materials San Diego CA Analytical Chemistry Laboratory needed to test a product for formaldehyde ( read more ).....
10-01891Pharmaceuticals USA GLP/GMP Bioanalytical Laboratory needed for detection of residual kanamycin in vaccine preparation ( read more ).....
10-01890Medical and Heathcare MEXICO MICROBIOLOGY LABORATORY NEEDED FOR IDENTIFICACION MICROBIANA DE MUESTRAS TOMADAS EN LABORATORIOS Y HOSPITALES. ( read more ).....
10-01889Oil and Gas China Analytical Chemistry Laboratory needed for GC Analysis on a hydrocarbon refrigerant blend-300 gram sample of R1270 (propylene) ( read more ).....
10-01888Consumer Products Gouda Microbiology Laboratory needed for efficacy testing of various products. Would like to verify the laundry, baby wipes, hand cleaners and surface cleaners capacity of sanitizing in accordance to: ASTM E2406 - 09 (Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations), ISO 20645:2004 (Textile fabrics -- Determination of antibacterial activity -- Agar diffusion plate test), ASTM E1153 - 03(2010)e1 (Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces), BS EN 1040:2005 (Chemical disinfectants and antispetics. Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antisepti ( read more ).....
10-01887Cosmetics, Toiletries and Personalcare Products Bioanalytical Laboratory needed to confirm efficacy of fairness Cream with reflectance Spectrophotometer. ( read more ).....
10-01886Mining, Metals and Ores Metallurgical Laboratory needed to conduct the following tests: a) HYDROGEN EMBRITTLEMENT Product : Copper Strip 25 X 3 mm Specification : BS EN 13601 b) RMS Current Density Product : Copper Strip 25 X 3 mm Specification : IEC60364-5-54 Subclause 543.1.1 & Appeandix A ( read more ).....
10-01885Pharmaceuticals Pharmaceutical Company needs Preclinical Contract Research Organization to perform IC50 determinations of compounds designed for against human prostaglandin D2 synthase (PGD2S) ( read more ).....
10-01884Pharmaceuticals Europe, USA or UK Preclinical Contract Research Organization needed for full binding receptor profile. ( read more ).....
10-01883Automotives Laboratory needed for automotive testing in accordance to VW50185; PV3929; PV3930 ( read more ).....
10-01882Natural Products Gujarat, India Toxicology Laboratory needed for acute and subacute herbal toxicity testing ( read more ).....
10-01881Food and Beverages Toronto Analytical Food Laboratory needed to test for free radical in cooking oil - 3 samples ( read more ).....
10-01880Medical Devices and In-Vitro Diagnostics Orange County, CA Histology Laboratory needed to prepare and analyze histology slides for porcine tissue. ( read more ).....
10-01879Chemicals USA EPA Environmental Laboratory needed to test chemical for B.P.gulf clean up for dispersivness, effectiveness, phototoxcitity ( read more ).....
10-01878Pharmaceuticals Preclinical Contract Research Organization needed to do a study with human cardiac myocytes ( read more ).....
10-01877Food and Beverages Analytical Food Laboratory needed to provide nutritional values for various menu options. ( read more ).....
10-01876Pharmaceuticals GLP Preclinical Contract Research Organization needed for toxicology testing: OECD 437,438; and in vitro EpiSkin, EpiDerm and SkinEthic ( read more ).....
10-01875Environmental and Ecology Pittsburgh PA Analytical Chemistry Laboratory needed to test for Benzene Metadisulfonic Acid, Benzene Monosulfonic Acid, p-Phenol Sulfonic Acid, Resorcinol ( read more ).....
10-01874Materials Canada Preferred Analytical Chemistry Laboratory needed for Gas chromatography test for residuals of ethylene oxide including ethylene oxide and ethylene chlorohydrin (2-chloroethanol). Need to test that residuals are below levels specified in ISO 10993-7. Specifically, we need to test that the levels are low enough that surface residuals will be below 10 um/cm^2 for ethylene oxide, and 5 um/cm^2 for ethylene chlorohydrin. Materials to be tested include: PDMS, gelatin, micro-electrodes of 80 micron diameter made of platinum-iridium coated with parylene-C, and 30 micron diameter microwires made of platinum irridium and coated in polyimide. Please test to ISO 10993-7 standards. ( read more ).....
10-01873Industrial Equipment and Suppies Eastern USA Metallurgical Laboratory needed for Elevated temperature (600F) galling test for Nitronic 60, Custom 450 and 17-4ph ( read more ).....
10-01872Environmental and Ecology California Analytical Chemistry Laboratory needed for BTEX testing on waste water. ( read more ).....
10-01871Construction and Building USA Analytical Chemistry Laboratory needed for Flash Point testing on 4 samples of an epoxy type paint type mixture. 2 contain toluene and 2 contain xylene. ( read more ).....
10-01870Pharmaceuticals Large Pharma needs USA Analytical Chemistry Laboratory to test 3 samples of H2O for methylene chloride. Detection needs to be ~500ug or less ( read more ).....
10-01869Packaging Europe (France) Materials Laboratory needed for testing samples of self adhesive materials for their characteristics according to FINAT specifications. ( read more ).....
10-01868Nutraceuticals and Dietary Supplements USA Analytical Food Laboratory needed for Nutritional Facts, shelf life determination in an accelerated environment. ( read more ).....
10-01867Nutraceuticals and Dietary Supplements GLP/USP Analytical Chemistry Laboratory needed to test four samples of different plant extracts, three of which are standardized extracts. I need to verify the standardizaton if the extracts, the certificates of analysis provided by the supplier, and I'd also like to test for common adulterants. ( read more ).....
10-01866Medical and Heathcare Europe Analytical Chemistry Laboratory needed to test molybdenum mineral in blood plasma serum using inductivley coupled plasma mass spectrometric ( read more ).....
10-01865Oil and Petroleum Canada Analytical Chemistry Laboratory needed for heavy oil and core analysis. ( read more ).....
10-01864Food and Beverages Seattle, Washington Analytical Food Laboratory needed to test food product (bacon jerky) for its water activity (to determine shelf stability) prior to submitting my HACCP application. ( read more ).....
10-01863Engineering Liberia/West Africa or surrounding Geotechnical Laboratory needed to perform testing. ( read more ).....
10-01862Pulp, Paper and Wood Products Metallurgical Laboratory needed for some metallurgy testing for Stainless steel 304 and Stainless steel 301. ( read more ).....
10-01861Pharmaceuticals Large Pharma needs cGMP Testing Laboratory for Working and Master Cell Banks for a select agent containing cell line. ( read more ).....
10-01860Oil and Petroleum Analytical Chemistry Laboratory needed to perform oil analysis. ( read more ).....
10-01859Oil and Petroleum Analytical Chemistry Laboratory needed to perform FTIR test to determine if used base oil is used to blend a sample lubricant oil ( read more ).....
10-01858Food and Beverages Analytical Chemistry Laboratory needed to test the following parameters(packaged drinking water) listed below: Color,Turbitity,TDS,pH,Iron, Nitrate, Nitrite, Chloride,Sulphate,Alkalinity,Calcium,Magnesium, Residual free chlorine,total hardness, phenopthalin alkanility, barium, Copper, Manganese, Zinc,Sulphide & Aluminium. ( read more ).....
10-01857Pharmaceuticals Analytical Chemistry Laboratory needed for the following: 1. Test to determine molecular weight of Hyaluronic Acid (ingredient in powder form) before production. 2. Test to determine molecular weight of Hyaluronic Acid in the finished liquid product. We want to have this test done every month for 2 years to determine how quickly the HA molecule degrades and what the shelf life is. 3. Stability test of the finished product - to test preservatives. How many tests and at what time intervals should they be performed? Our goal is to have 2 year product shelf life. 4. Product safety tests to insure there is no contamination of any sort after production. We are planning to manufacturer a liquid food supplement for people, with the fol ( read more ).....
10-01856Consumer Products Canada Microbiology Laboratory needed to test efficiency of wash formulations with repect to removal of grease, pesticides, insectides and bacteria ( read more ).....
10-01855Packaging Northern New Jersey Packaging Laboratory needed for Corrugated - Mullen, ECT tests etc. ( read more ).....
10-01854Medical Devices and In-Vitro Diagnostics Japan/China Materials Laboratory needed to test body warmer bags in accordance to JIS S 4100: 1. S - 4100 - JIS . Certificate examination in English certified laboratory indicating the matching bag requirements of Standard Japanese JIS S 4100). I require lab report to this effect 2. S - 4100 - JIS ). Manufacturer's written statement about the continued supply of heat at least 18 hours (under review by the Japanese standard JIS S 4100). I need lab report of temperature over 18 hour period 3. MSDS and / or concentration of a test certificate harmful substances to the human body (under review by the Japanese standard JIS S 4100). Lab report required. ( read more ).....
10-01853Plastics and Polymers Hong Kong Analytical Chemistry Laboratory needed for GPC molecular weight analysis of silicone polymers ( read more ).....
10-01852Agriculture Pune Physical Laboratory needed to test instrument cluster units for Dust (organic and inorganic). ( read more ).....
10-01851Pharmaceuticals Large Pharma needs USA FDA GMP Analytical Chemistry Laboratory for ICH Q5D testing ( read more ).....
10-01850Medical Devices and In-Vitro Diagnostics Materials Laboratory needed for ASTM testing to ASTM F2101, ASTM E2419 ( read more ).....
10-01849Pharmaceuticals Non GLP Preclinical Contract Research Organization needed to test mitrochondrial toxicity of nucleoside analogs ( read more ).....
10-01848Biotechnology India Bioanalytical Laboratory needed for Isoelectric focussing of ESBL and AmpC enzymes of E coli. ( read more ).....
10-01847Construction and Building USA Materials Laboratory needed to carry out ANSI grade 3 testing on door handles. ( read more ).....
10-01846Food and Beverages India Microbiology Laboratory needed for testing Dehyderated onion kibbled for:coli forl, ecoli,salmonella, T.P.C, Molds & Yeasts,B.cereus,moisture content,ash Content etc... ( read more ).....
10-01845Plastics and Polymers Materials Laboratory needed for analysis of Flame Retardant Poly Sheeting product in accordance to NFPA 701 (Test Method 2) ( read more ).....
10-01844Pharmaceuticals USA Analytical Chemistry Laboratory needed to test Hyaluronic acid in accordance to ASTM or USP or ISO. ( read more ).....
10-01841Pharmaceuticals Microbiology Laboratory needed to conduct a virucidal test. ( read more ).....
10-01840Environmental and Ecology USA ISO 17025 Materials Laboratory needed for ASTM F726-06 test to be performed on a cellulose fiber product. ( read more ).....
10-01839Pharmaceuticals Bioanalytical Laboratory needed for formulation development for recombinant protein for either lyophilized or parental fill applications, under 3000 vials under cGMP. ( read more ).....
10-01838Plastics and Polymers INDIA ASTM MATERIALS LABORATORY NEEDED FOR THERMAL CONDUCTIVITY TESTING OF XPS FOAM IN ACCORDANCE TO ASTM. ( read more ).....
10-01837Consumer Products Los Angeles FDA Mechanical Laboratory needed for standard FDA Test for Sunglasses - called a 'drop ball' test. Ball is dropped on the lens's to ensure they are shatterproof. ( read more ).....
10-01836Environmental and Ecology Europe Laboratory needed for MIL-STD-810G Method 508.6 Fungus, Table 508.6-I. US Test fungus. Test various materials and return to requestor for further testing. ( read more ).....
10-01835Plastics and Polymers Europe Physical Laboratory needed to do thermal analysis by DSC on three kinds of thermoplastic materials-are interested in the decomposition temperatures of the three materials. ( read more ).....
10-01834Metallurgical Europe ISO/GLP Analytical Chemistry Laboratory needed for identification analysis for iron furnance (pig iron) according to REACH regulations. ( read more ).....
10-01833Engineering Australia Mechanical Laboratory needed for dynamic testing of D-rated kingpins in accordance to AS/NZS 4968.3:2003, A horizontal alternating test load is applied for a specified number of cycles ( read more ).....
10-01832Medical and Heathcare Clinical Laboratory needed for testing blood serum levonorgestrel levels. ( read more ).....
10-01831Pharmaceuticals USA GMP Analytical Chemistry Laboratory needed for total, soluble, and insoluble fiber ( read more ).....
10-01830Environmental and Ecology San Diego, CA Environmental Laboratory needed to collect up to 575 soil samples from up to 77 vernal pools for dry season fairy shrimp surveys. These soil samples will require analysis for fairy shrimp cyst identification and may require cyst culture and identification. ( read more ).....
10-01829Construction and Building Analytical Chemistry Laboratory needed to perform testing for tribromoanisole/tribromophenol in paper (destructive testing) and on aluminum can liners. ( read more ).....
10-01828Food and Beverages Mexico, Argentina, Chile, Central America Analytical Food Laboratory needed for mold and yeast counts, propionic acid levels in corn and petfood diets. ( read more ).....
10-01827Mining, Metals and Ores Pune Geological Laboratory needed to test mineral from Bauxite ore. ( read more ).....
10-01826Consumer Products ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR VAPOR PRESSURE OF FLAVOR COMPOUND W/ WATER SOLUBLE SOLVENTS. (I am told a gasoline/etoh method will not be accurate). ( read more ).....
10-01825Environmental and Ecology Dallas or Ft. Worth, Texas Microbiology Laboratory needed to test for total coliforms on a non-chlorinated marine mammal system. We need at least one test per month, perhaps more frequently ( read more ).....
10-01824Natural Products Malaysia Packaging Laboratory needed for Carton Box Drop Test. We will send the sample of the carton box . ( read more ).....
10-01823Pharmaceuticals Europe Preclinical Contract Research Organization needed for xenograft testing. ( read more ).....
10-01822Plastics and Polymers Asia Packaging Laboratory needed for: 1)Poly Carbonate Compatability Test 2)Charge Generation 3) Static Decay, 4) Surface Resistance ( read more ).....
10-01821Food and Beverages RLIC Camp Analytical Chemistry Laboratory needed for Potable Water analysis. ( read more ).....
10-01820Materials India Analytical Chemistry Laboratory needed for carbon black analysis by Inverse GC or gas formulyzer ( read more ).....
10-01819Construction and Building Toronto, ON ASTM Materials Laboratory needed to assist with testing of construction waterproofing materials in accordance to ASTM C1305, C1246, C957 and other standards. ( read more ).....
10-01818Cosmetics, Toiletries and Personalcare Products Arizona Consumer Products Safety Laboratory needed to test cream before putting on the market to sell. ( read more ).....
10-01817Chemicals Asia ISO Laboratory needed for Natural gas mixtures analysis in accordance to ISO 17025. ( read more ).....
10-01816Mining, Metals and Ores Non-Destructive Laboratory needed to conduct Solid Gold authentication to assess the gold contents and age without damaging the consignment. ( read more ).....
10-01815Pharmaceuticals USA Bioanalytical Laboratory needed to use dsred and EGFP antibody to detect ds red and EGFP fluorescents in Rat and mouse tissues ( read more ).....
10-01814Agriculture Houston TX ASTM Laboratory needed for Static Degradation on cotton seed huls ( read more ).....
10-01813Safety Equipment and Supplies USA Materials Laboratory needed to test 2 jackets to make sure they meet ANSI class 3 standards. ( read more ).....
10-01812Medical Devices and In-Vitro Diagnostics Bioresorbable Medical Device Company needs GLP Preclinical Contract Research Organization in Europe/Netherlands for development phase for one of our existing product. Regarding the same we need to do some in vivo(rat model) study for which we need to have GLP certified labs. The study is intended as a short term study. ( read more ).....
10-01811Industrial Equipment and Suppies Eastern USA Mechanical Laboratory needed for testing of galling of S21800 in combination with S17400, S21800 and S45000. Temperature of 600F required. ( read more ).....
10-01810Environmental and Ecology Europe Analytical Chemistry Laboratory needed for ICP-MS analysis on soil, water and sediment samples for environmental research - we do have a substantial number of samples per year. ( read more ).....
10-01809Pharmaceuticals Analytical Chemistry Laboratory needed for Accelerated Stability Testing to support 2 year shelf life for two products: 1- Astaxanthin 2- DHA (Omega-3) ( read more ).....
10-01808Automotives Asia Laboratory needed for Product Safety Testing in accordance to FMVSS Std. J1571, J1573: one unit of sample to go through the crash test for 4x4 pick up. Rear Step bumper for pick up. ( read more ).....
10-01807Consumer products South Florida USA GMP Consumer Products Safety Laboratory needed for Product safety, performance, claim substantiation, toxicology, dermal irritation, sensitization...in accordance to FDA, CPSC, Possibly 21-40 samples ( read more ).....
10-01806Cosmetics, Toiletries and Personalcare Products Eastern USA FDA Analytical Chemistry Laboratory needed for HPLC and other Actives analysis for finished sunscreen products, includes organic and inorganic materials. ( read more ).....
10-01805Engineering Electrical Laboratory needed for testing several electrical clamps to understand voltage drop with carry current more than 50 Amps (DC).. in accordance to A2LA, ASTM, ISO. ( read more ).....
10-01804Chemicals Analytical Chemistry Laboratory needed for testing. ( read more ).....
10-01803Aerospace and Aeronautical Analytical Chemistry Laboratory needed to perform tests on SF6 (sulfur hexafluoride gas) mixed with Nitrogen or hydrocarbon gases. Tests include dielectric properties. ( read more ).....
10-01802Toys and Children's Products Consumer Products Safety Laboratory needed for toy testing a new line of handmade toys that are being imported. We would like to assess what ages they are suitable for and labeling requirements. ( read more ).....
10-01801Pharmaceuticals Analytical Chemistry Laboratory needed for HPLC analysis on purported pharmaceutical product. An IR analysis has recently been done in my Organic chem lab. Please advise cost involved. ( read more )..... Closed
10-01800Food and Beverages Algeria Analytical Food Laboratory needed for Calorie Testing amount of fat ( read more ).....
10-01799Engineering Acoustics Laboratory needed for vibration testing, effect of load on natural frequency of vibrations of a lever pin supported at one end carrying adjustable load on a vertical screwed bar and spring supported at some Intermediate point (i) When the dead weight of rods is neglected and (ii) when their dead weight is taken into account 2- To find out frequency of damped free vibration and rate of decay of vibration-amplitude in the system. 3- To find out natural frequency and damped free frequency of a torsion pendulum and , hence to find out coefficient of damping of the oil ; 4- To observe the phenomenon of 'whirl' in a horizontal light shaft and to determine the critical speed of the shaft. 5- To observe the mode shapes of a spring ( read more ).....
10-01798Pharmaceuticals Bioanalytical Laboratory needed to test and assist with the development of a skin product invention. ( read more ).....
10-01797Pharmaceuticals Bioanalytical Laboratory needed to perform polymorph identification tests DSC and XRPD. ( read more ).....
10-01796Biotechnology USA Bioanalytical Laboratory needed for Bradykinin assays 2. PKA assays 3. Kiniogen HMWK 4.PKA testing of all plasma derivatives ( read more ).....
10-01795Consumer Products ISO Packaging Laboratory needed for ISO testing: iso 5628, iso 3037, iso2759, iso 3035, iso 535, iso 3034 ( read more ).....
10-01794Occupational Health and Hygiene South Africa OSHA Environmental Laboratory needed for air testing Hexavalent Chromium, preferably, OSHA ID 215 method ( read more ).....
10-01793Chemicals Hyderabad ISO Physical Laboratory needed to determine the depth of each layer of two different kinds of paint coating i.e red oxide + color paint on cold rolled steel sheet products and provide inspection report for the same. ( read more ).....
10-01792Medical Devices and In-Vitro Diagnostics Australia/USA GLP Laboratory needed for cytotoxicity testing of medical devices, contact lens. Agar overlay and direct contact. Must be GLP certified for regulatory body, TGA, CE mark ( read more )..... Closed
10-01791Animal Health and Veterinary Science USA/Canada Laboratory needed for NPMA entomology analysis on several insect types as approved by NPMA. ( read more ).....
10-01790Food and Beverages Bioanalytical Laboratory needed to screen for the presence of Zeranol, Trenbolone, or Melengestrol in beef samples. ( read more ).....
10-01789Electronics Eastern USA Electrical Laboratory needed to test our 480V, 60 Hz, 100 kW Active Rectifier for its response to voltage dips and frequency shifts while both sourcing and sinking rated power. ( read more ).....
10-01788Automotives ANSI Laboratory needed for testing in accordance to ANSI Z26.1 Automotive Glazing Plastic Transparent Nylon 2 thicknesses 0.1" to 0.236" Item 6 testing Test 2 Light transmission Test 16 weathering Test 19 chemical Test 29 chemical Test 22 Flex Teest 23 flammability ( read more ).....
10-01787Oil and Petroleum Southwest Asia Laboratory needed for Shelf life extension testing for petroleum products in accordance to U.S. Department of Defense military specification. ( read more ).....
10-01786Textiles India ISO Analytical Chemistry Laboratory needed for testing Oil Content in a sample of Wax in accordance to ISO standards. ( read more ).....
10-01785Oil and Petroleum Asia Analytical Chemistry Laboratory needed for High Pressure High Temperature (HPHT) test for drilling fluids ( read more ).....
10-01784Agriculture FDA Bioanalytical Laboratory needed for Quantifying the Cyanogenic Glycosides in a sample of flaxseed. 1. The sample is hydrolyzed with sulfuric acid. 2. Produced cyanide gas from the hydrolysis is collected 3. cyanide gas collected from the number 2 step are deposited into sodium hydroxide solution. 4. Quantitative analysis is done on the deposited hydrogen cyanide by using chromogenic method (red coloration) or ion chromatography (IC). Note: FDA does the quantitative analysis on cyanogen in the hydrogen cyanide and cyanogenic glycosides ( read more ).....
10-01783Oil and Petroleum Analytical Chemistry Laboratory needed for testing petrol and diesel. ( read more ).....
10-01782Oil and Petroleum Australia, New Guinea Mechanical Laboratory needed for testing Pipe Field Joint Coating for: Film Thickness (DFT) [SSPC PA 2 using Type II Instrument] Impact Resistance [ASTM G14, 23°C] Adhesion to steel [ISO 4624 (at 23°C and 65°C)] Hot Water Soak/Adhesion [NACE RP0394, 50°C] Penetration Resistance [ASTM G17] 24-h Cathodic Disbondment [NACE RP0394, 65°C, -3.5V] 28-d Cathodic Disbondment [NACE RP0394, 25°C, -1.5V] Coating Repair According to PG-PDS 29-02-16 section 7 requirements] ( read more ).....
10-01781Consumer Products Consumer Products Safety Laboratory needed for testing to obtain product safety certificates. We are a Dutch company and were contacted by Disneyland to become vendors, but we need the safety certificates to proceed. This is our product website: www.goodluckhorseshoes.com ( read more ).....
10-01780Environmental and Ecology Eastern USA Laboratory needed for Gross Alpha and Beta Radionuclides testing in accordance to FDA, EPA, DEP. ( read more ).....
10-01779Rocks and Minerals Louisiana (or near) Geological Laboratory needed for mineral testing Fluospur=> (1) - 2kg sample ( read more ).....
10-01778Building and Construction USA ASTM Materials Laboratory needed for testing in accordance to ASTM E84 ( read more ).....
10-01777Food and Beverages Canada Analytical Food Laboratory needed to perform Chemical Residue and Radiation test on a Yellow Soybean Sample. ( read more ).....
10-01776Medical and Healthcare USA Laboratory needed for 20 person electromygraphy study with 3 or 4 footwear conditions. ( read more ).....
10-01775Medical Devices and In-Vitro Diagnostics Eastern USA FDA Laboratory needed for analysis of single use (disposable) stainless steel instruments, scissors, forceps etc for chromium content etc according to FDA. ( read more ).....
10-01774Food and Beverages Packaging Laboratory needed to perform analysis and check a PVC film according to Food Contact Regulations , especially for 2002/72/EC with respect to its Overall and Specific Migration results. Specifically we want to check the migrations of the following substances, whether they are: Tallowtrimethylammonium chloride (CAS # 8030-78-2) Quaternary ammonium salt (CAS # 68308-64-5) Amines, coco alkyldimethyl (CAS # 61788-93-0) Also we wish that the final report should determine and comment on the compliance of the films with the regulations. ( read more ).....
10-01773Medical Devices and In-Vitro Diagnostics New Zealand Consumer Products Safety Laboratory needed for testing shower and bath transfer chair system to Australian and New Zealand standards AS/NZ 3973:2009. We would provide 1 test sample to have tested. ( read more ).....
10-01772Oil and Petroleum East Asia ASTM Laboratory needed for High Pressure High Temperature (HPHT) for drilling fluid. ( read more ).....
10-01771Food and Beverages USA FDA Food Laboratory needed for FDA Nutritional Testing for Nutritional Labels for 2 BBQ sauce samples. ( read more ).....
10-01770Apparel and Footwear Consumer Products Safety Laboratory needed for testing of odor preventing innersole/insert for footwear. Interested in testing including chemicals, durability, sweat absorption, cushioning, product care recommendations. ( read more ).....
10-01769Safety Equipment and Suppies USA ANSI Laboratory needed for testing of finished products for compliance with ANSI/ASSE A10.32-2004: Fall Protection Systems ( read more ).....
10-01768Electrical Product Safety Laboratory needed for testing electric cables under fire conditions in accordance to IEC 60332-3-22. 14 samples or more. ( read more ).....
10-01767Biotechnology Southern California Bioanalytical Laboratory needed to: 1. Prepare tissue section slides from samples of tissue isolated from laboratoty mice. 2.Perform immunostaining of these slides for human albumin, human a1-antitrypsin, human alpha fetoprotein, any human specific marker. ( read more ).....
10-01766Agriculture USA Soil Laboratory needed for testing soil samples for potential gold properties in them. ( read more ).....
10-01765Food and Beverages India ISO Analytical Food Laboratory needed for Nutritional Information on 11 sample products in accordance to ISO. ( read more ).....
10-01764Cosmetics, Toiletries and Personalcare Products Western USA FDA Laboratory needed for preservative efficacy on one sample of cosmetic face cream in accordance to FDA USP51 ( read more ).....
10-01763Food and Beverages Toronto Analytical Food Laboratory needed for Beer, sensory evaluation. ( read more ).....
10-01762Consumer Products Product Safety Laboratory needed to test child resistance in lighters. ( read more ).....
10-01761Biotechnology USA Bioanalytical Laboratory needed to have an H&E completed-- rat breast tumor tissue approximately 4 years old,storage in -80 freezer,12 samples ( read more ).....
10-01760Medical and Healthcare Clinical Laboratory needed for Titer to CMV antibodies and also if seroconverstion to seropositive has taken place. ( read more ).....
10-01759Oil and Petroleum USA ASTM Analytical Chemistry Laboratory needed for Heat of Vaporization testing by ASTM D2879 ( read more ).....
10-01758Electronics Belgium-France SAR Testing Laboratory needed to test anti radiation mobile stickers. ( read more ).....
10-01757Environmental and Ecology Bolivia or South America Analytical Chemistry Laboratory needed for testing 1 sample of particles from air filter for semi-quantitative EDS or EDX analysis ( read more ).....
10-01756Engineering Canada Mechanical Laboratory needed for NACE mro 175 and ISO stress testing, corrosion cracking testing in accordance with NACE MR0175/ISO 15156 Part 3 Annex B Section B.3 Also reference NACE Paper No 10308. Test 1: 185C, pH: 6, Cl-: 2000ppmw, H2Spp: 2.0 kPaa. If Test 1 fails then Test 2: 140C, pH: 6, Cl-: 2000ppmw, H2Spp: 2.0 kPaa. ( read more ).....
10-01755Rocks and Minerals Europe Geological Laboratory needed to determine geochemical composition of black shale ore/ limestone rock sample. In particular indicate if there is Graphite in rock of economical value and if so estimated % of elemental carbon in sample. ( read more ).....
10-01754Consumer Products China EN Consumer Products Safety Laboratory needed for testing: porcelain studies on the release of cadmium and lead on the depth and the outskirts In the case of porcelain and other products are products for food contact like mugs, plates, bowls We need research to cadmium and lead in line with European standards. In Poland it is determined in accordance with the method PN-EN 1388-1:2000 That's mean EN 1388-1:2000 PN-B-13210:1997 Max Pb 2,0 mg / l - 0,8 mg/dm² Max Cd 0,30 mg / l - 0,07 mg/dm² And the melamine and plastic global migration PN-EN 1186-9:2006 or PN-EN 1186-14:2005 That's mean EN 1186-9:2006 Or EN 1186-14:2005 and specific migration ( read more ).....
10-01753Textiles USA Laboratory needed for testing in accordance to CRI Test Method - 101 Reference Documents ASTM Standards: D-5251 D-5252 D-5417 D-5684 D-6199, Lab certification testing (RATING NUMBER 0 - 5) 1 sample per style ( read more )..... Closed
10-01752Oil and Petroleum Syria Analytical Chemistry Laboratory needed for octane number testing. ( read more ).....
10-01751Building and Construction India Materials Laboratory needed for testing in accordance to ASTM or ISO for measurement of thermal conductivity and fire retardancy/ resistance of wood based panels. Please specify no of panels needed for testing. ( read more ).....
10-01750Pharmaceuticals Hyderabad India FDA Laboratory needed for pyrogenicity test for pharma products - cufuroxime sodium ( read more ).....
10-01749Pharmaceuticals Asia Bioanalytical Laboratory needed to test one sample that is the recombinant human interleukin-2 for quantitative purity, safety and pyrogenic. ( read more ).....
10-01748Medical and Healthcare USA Clinical Laboratory needed for serum testing, cotinine analysis - Approximately 4000 serum samples per year. ( read more ).....
10-01747Environmental and Ecology Analytical Chemistry Laboratory needed for heat of combustion testing of process tail gases. ( read more ).....
10-01746Safety Equipment and Supplies Toronto Product Safety Laboratory needed for Safety boots testing. ( read more ).....
10-01745Oil and Petroleum Analytical Chemistry Laboratory needed for crude oil testing in the gulf. ( read more ).....
10-01744Plastics and Polymers UAE Physical Laboratory needed for Oxidation induction time testing of HDPE pipes ( read more ).....
10-01743Chemicals Analytical Chemistry Laboratory needed for sludge analysis of dewatered sludge from an industrial (activated sludge treatment) wastewater treatment plant for isobutyraldehyde ( read more ).....
10-01742Electronics Electrical laboratory needed for ASTM testing: Dielectric Constant, Dissipation @ 1GHz and 10GHz,Dielectric Strength, Vol/Surface Resistivity. ( read more ).....
10-01741Medical and Healthcare Scotland Microbiology Laboratory needed for Viable count, re Grade C cleanroom launch in accordance to GLP, ISO,UKAS ( read more ).....
10-01740Oil and Petroleum INDIA ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR TESTING CRUDE PETROLEUM PRODUCTS AS FOLLOWS IN ACCORDANCE TO ASTM, DIN AND ISO: 1. Characterization of Crude Oils, Distillation Fractions and Finished Fuels. 2. Petroleum Product Testing. 3. Elemental Analysis. 4. Simulated and Full Range Distillation. 5. Mass Spectrometry (HRMS and GC/MS). 6. Spectroscopy (UV and XRF). 7. Chromatography (GC and HPLC). 8. Physical Property Tests (ASTM and Others). ( read more ).....
10-01739Pharmaceuticals Philippines Preclinical Contract Research Organization needed for in-vitro spf testing ( read more ).....
10-01738Automotives ANSI Laboratory needed for testing the following as per Per ANSI NGV 2-2007: Ambient Cycling Test Extreme Temp Cycling Hydrostatic Burst Test Composite Flaw Tolerance Test Drop Test Bonfire Test Accelerated Stress Test Penetration Test Permeation Test Natural Gas Cycling Test Leak Before Break ( read more ).....
10-01737Agriculture USA Analytical Chemistry Laboratory needed for testing for anthraquinone residue on foilage (i.e. turf grass)in accordance to OPPTS Guideline 875.2100. ( read more ).....
10-01736Biotechnology Bioanalytical Laboratory needed that has experience with CE-MS to try and Identify the peaks seen in the profile for a newly developed capillary electrophoresis method for a glycoprotein. ( read more ).....
10-01735Nutraceuticals Analytical Food Laboratory needed to provide authentication of WHITE TURMERIC powder for alternate CANCER fighting medication ( read more ).....
10-01734Industrial Equipment and Supplies India Mechanical Laboratory needed to test our fume hoods in accordance to ASHRAE. <